Dell Vostro 5470 Owners Manual - Page 15

Removing the mSATA SSD Card, Removing the System Fan, Before Working Inside Your Computer

Get Dell Vostro 5470 PDF manuals and user guides View all Dell Vostro 5470 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

Removing the mSATA SSD Card 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a) base cover b) battery 3. Remove the screw that secures the mSATA SSD card to the computer. 4. Remove the mSATA SSD card from its slot on the system board. Installing the mSATA SSD Card 1. Insert the mSATA SSDcard into its connector at a 45-degree angle. 2. Tighten the screw to secure the mSATA SSD card to the computer. 3. Install: a) battery b) base cover 4. Follow the procedures in After Working Inside Your Computer. Removing the System Fan 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a) base cover b) battery 3. Perform the steps as shown in the illustration: a) Disconnect the left system fan cable from its connector on the system board. b) Remove the screws that secure the left system fan to the system board. 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
Removing the mSATA SSD Card
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a)
base cover
b)
battery
3.
Remove the screw that secures the mSATA SSD card to the computer.
4.
Remove the mSATA SSD card from its slot on the system board.
Installing the mSATA SSD Card
1.
Insert the mSATA SSDcard into its connector at a 45–degree angle.
2.
Tighten the screw to secure the mSATA SSD card to the computer.
3.
Install:
a)
battery
b)
base cover
4.
Follow the procedures in
After Working Inside Your Computer.
Removing the System Fan
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a)
base cover
b)
battery
3.
Perform the steps as shown in the illustration:
a)
Disconnect the left system fan cable from its connector on the system board.
b)
Remove the screws that secure the left system fan to the system board.
15