Dell Vostro 5560 Owner's Manual - Page 15
Installing the Heat Sink, Removing the Memory, Installing the Memory
View all Dell Vostro 5560 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
4. Lift and remove the heat sink from the computer. Installing the Heat Sink 1. Place the heat sink into its original position on the system board. 2. Tighten the screws that secure the heat sink to the system board. 3. Install : a) battery b) base cover c) optical drive 4. Follow the procedures in After Working Inside Your Computer. Removing the Memory 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a) optical drive b) base cover c) battery 3. Pry the securing clips away from the memory module until it pops-up. Remove the memory module from its connector on the system board. Installing the Memory 1. Insert the memory module into the memory socket. 2. Press the memory module until it clicks into place 3. Install: a) battery b) base cover c) optical drive 4. Follow the procedures in After Working Inside Your Computer. 15