Dell Vostro 5560 Owner's Manual - Page 18
Installing the Camera, Removing the Input/Output (I/O) Board, After Working Inside Your Computer.
View all Dell Vostro 5560 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Installing the Camera 1. Align the camera to the base panel . 2. Connect the camera cable to the camera. 3. Install : a) display bezel b) battery c) base cover d) optical drive 4. Follow the procedures in After Working Inside Your Computer. Removing the Input/Output (I/O) Board 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a) optical drive b) base cover c) battery 3. Disconnect the I/O board cable from the system board. 4. Remove the screw that secures the I/O board to the computer and lift the I/O board from the computer. Installing the Input/Output (I/O) Board 1. Place the I/O board in its slot and snap it in place. 2. Tighten the screws to secure the I/O board to the computer. 3. Connect the I/O cable to the system board. 4. Install: a) battery 18