Dell Vostro 7620 Service Manual - Page 15
Installing the base cover, Steps, Prerequisites, About this task
View all Dell Vostro 7620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Steps 1. Remove the seven screws (M2x4) that secure the base cover to the palm-rest and keyboard assembly. 2. Loosen the two captive screws that secure the base cover to the palm-rest and keyboard assembly. 3. Using a plastic scribe, pry the base cover from the top left and continue to work on the sides to open the base cover. 4. Lift and slide the base cover off the palm-rest and keyboard assembly. Installing the base cover Prerequisites If you are replacing a component, remove the existing component before performing the installation process. About this task The following image(s) shows the base cover and provides a visual representation of the installation procedure. Removing and installing components 15
Steps
1.
Remove the seven screws (M2x4) that secure the base cover to the palm-rest and keyboard assembly.
2.
Loosen the two captive screws that secure the base cover to the palm-rest and keyboard assembly.
3.
Using a plastic scribe, pry the base cover from the top left and continue to work on the sides to open the base cover.
4.
Lift and slide the base cover off the palm-rest and keyboard assembly.
Installing the base cover
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following image(s) shows the base cover and provides a visual representation of the installation procedure.
Removing and installing components
15