Dell Vostro 7620 Service Manual - Page 39
Display assembly, Removing the display assembly
![]() |
View all Dell Vostro 7620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Steps 1. Align the screw holes on the heat sink to the screw holes on the system board. 2. In sequential order (1>2>3>4>5>6>7), tighten the seven captive screws that secure the heat sink to the system board. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. Display assembly Removing the display assembly Prerequisites 1. Follow the procedure in Before working inside your computer. NOTE: Ensure that your computer is in Service Mode. For more information see, step 6 in Before working inside your computer. 2. Remove the base cover. About this task The following image(s) indicate the location of the display assembly and provides a visual representation of the removal procedure. Removing and installing components 39
![](/manual_guide/products/dell-vostro-7620-service-manual-364e5d1/39.png)