Dell W-Series 205H Instant 6.5.1.0-4.3.1.0 CLI Reference Guide - Page 2034

Control-Plane Security Whitelist-entry Details MAC-Address AP-Group AP-Name ----------- -------- ------- 00:16:CF:AF:3E:E1 employee ap-office1 Enable -----Enabled State ----cert-cont-cert Cert-Type Description Revoke Text Last Updated switch-cert Fri Oct 16 01:21:09 2009 Whitelist Entries: 1 The output of this command includes the following parameters: Parameter MAC-Address Enable State Cert-Type Description Revoke Text Last Updated Description MAC address of the campus AP. Shows whether the campus AP has been enabled or disabled. Shows the current state of the campus AP. l unapproved-no-cert: AP has no certificate and is not approved. l unapproved-factory-cert: AP has a preinstalled certificate that was not approved. l approved-ready-for-cert: AP is valid, but is waiting to receive a certificate. l certified-factory-cert: AP has an approved factory-installed certificate l certified-controller-cert: AP has an approved certificate from the controller. l certified-hold-factory-cert: An AP is put in this state when the controller thinks the AP has been certified with a factory certificate yet the AP requests to be certified again. Since this is not a normal condition, the AP will not be reapproved as a secure AP until a network administrator manually changes the status of the AP to verify that it is not compromised. l certified-hold-controller-cert: An AP is put in this state when the controller thinks the AP has been certified with a controller certificate yet the AP requests to be certified again. Since this is not a normal condition, the AP will not be reapproved as a secure AP until a network administrator manually changes the status of the AP to verify that it is not compromised. Type of certificate used by the AP. l switch-cert: AP received a certificate from the controller l factory-cert: AP has a factory-installed certificate If you included an optional description when you added the AP to the campus AP whitelist, that description will appear here. If you included an optional revoke description when you manually revoked the AP, that description will appear here. Date and time that the AP record was last updated in the database. 2034| show whitelist-db cpsec Dell Networking W-Series ArubaOS 6.5.x | Reference Guide