Dell W-Series 207 Instant 6.5.1.0-4.3.1.0 CLI Reference Guide - Page 2343

dtim-period eapol-rate-opt edca-parameters -profile ap|sta enforce-user-vlan essid g-basic-rates g-beacon-rate g-tx-rates Description Range Specifies the interval, in milliseconds, between the sending of Delivery Traffic Indication Messages (DTIMs) in the beacon. This is the maximum number of beacon cycles before unacknowledged network broadcasts are flushed. When using wireless clients that employ power management features to sleep, the client must revive at least once during the DTIM period to receive broadcasts. Default 1 Use a more conservative rate for more - reliable delivery of EAPOL frames. enabled Name of the enhanced distributed - - channel access (EDCA) profile that applies to this SSID. NOTE: This parameter requires the PEFNG license. Configure this parameter only under the guidance of your Dell representative. Assigns the specified EDCA profile to AP - - or station (client). Strict enforcement of data traffic only in - - user's assigned vlan (Open stations only). Name that uniquely identifies a wireless - network. The ESSID can be up to 31 characters. If the ESSID includes spaces, you must enclose it in quotation marks. aruba-ap List of supported 802.11b/g rates that are advertised in beacon frames and probe responses. 1, 2, 5, 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps 1, 2 Mbps Sets the beacon rate for 802.11g (use for Distributed Antenna System (DAS) only). Using this parameter in normal operation may cause connectivity problems. default, 1,2,5, 6 9, 11, 12, 18, 24, 36, 48, 54 Mbps minimum valid rate Set of 802.11b/g rates at which the AP is allowed to send data. The actual transmit rate depends on what the client is able to handle, based on information sent at the time of association and on the current error/loss rate of the client. 1, 2, 5, 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps 1, 2, 5, 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps 2343| wlan ssid-profile Dell Networking W-Series ArubaOS 6.5.x | Reference Guide