Dell W-Series 207 Instant 6.5.1.0-4.3.1.0 CLI Reference Guide - Page 772

Parameter vlan add remove router-id subnet exclude Description Redistribute the vlan user subnet. Add the user VLANs to the list Remove user VLANs to the list. Enter the router ID in IP address format. Specify the subnet that OSPF will not advertise. Enter the subnet and mask address in dotted decimal format (A.B.C.D). Usage Guidelines OSPFv2 is a dynamic Interior Gateway routing Protocol (IGP) based on IETF RFC 2328. The ArubaOS implementation of OSPF allows controllers to deploy effectively in a Layer 3 topology. For more detailed information, refer to the OSPF Chapter in the Dell Networking W-Series ArubaOS User Guide. Example By default OSPF will advertise all the user VLAN subnet addresses in the router LSA (Link-State Advertisement). To control the OSPF advertisement, execute the following command: (host) (config) # router ospf subnet exclude 75.1.1.0 255.255.0.0 With the above command, any user VLAN subnet matching 75.1/16 will not be advertised in the router LSA. To return to the default advertisement, execute the command: (host) (config) # no router ospf subnet exclude 75.1.1.0 255.255.0.0 Related Commands Command show ip ospf Description View OSPF configuration Command History Release ArubaOS 3.4 ArubaOS 6.0 ArubaOS 6.3 Modification Command introduced Added the options: area, default-cost, nssa, and default-information originate always The aggregate-route and rapng-vpn parameters were introduced. 772| router ospf Dell Networking W-Series ArubaOS 6.5.x | Reference Guide