Dell W-Series 324 Instant 6.4.3.1-4.2 CLI Guide - Page 332

show ap monitor show ap monitor {active-laser-beams|ap-list|ap-wired-mac |arp-cache| containment-info| enet-wired-mac | ids-state | pot-ap-list | pot-sta-list| rogue-ap | routers| scan-info| sta-list| state | stats | status} Description This command shows information for W-IAP Air Monitors. Syntax Parameter active-laser-beams ap-list ap-wired-mac arp-cache containment-info Description Shows active laser beam generators. The output of this command shows a list of all APs that are actively performing policy enforcement containment such as rogue containment. This command can tell us which AP is sending out deauthorization frames, although it does not specify which AP is being contained. Shows list of APs being monitored. Shows the MAC address of the wired W-IAP. Shows ARP Cache of learned IP to MAC binding Shows containment events and counters triggered by the wired containment and wireless containment features configured in the ids. The output of this command shows device and target data for wired containment activity, as well as data for the following counters. Wireless Containment Counters: l Last Deauth Timer Tick l Deauth frames to AP l Deauth frames to Client l Last Tarpit Timer Tick l Tarpit Frames: Probe Response l Tarpit Frames: Association Response l Tarpit Frames: Authentication l Tarpit Frames: Data from AP l Tarpit Frames: Data from Client l Last Enhanced Adhoc Containment Timer Tick l Enhanced Adhoc Containment: Frames To Data Sender l Enhanced Adhoc Containment: Frames To Data Receiver l Enhanced Adhoc Containment: Response to Request Enhanced Adhoc Containment: Replay Response Wired Containment Counters: l Last Wired Containment Timer Tick l Last Tagged Wired Containment Timer Tick l Spoof frames sent l Spoof frames sent on tagged VLAN 332 | show ap monitor Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide