Dell W-Series 324 Instant 6.4.3.1-4.2 CLI Guide - Page 42

Command/Parameter no... Description Range together. The 40 MHz channels double the frequency bandwidth available for data transmission. For high performance, enter 5GHz. If the AP density is low, enter 2.4GHz. Removes the current value for that - parameter and return it to its default setting Default - Usage Guidelines Use this command to configure ARM features on a W-IAP. ARM ensures low-latency roaming, consistently high performance, and maximum client compatibility in a multi-channel environment. By ensuring the fair distribution of available Wi-Fi bandwidth to mobile devices, ARM ensures that data, voice, and video applications have sufficient network resources at all times. ARM allows mixed 802.11ac, a, b, g, and n client types to inter-operate at the highest performance levels. Example The following example configures an ARM profile: (Instant AP)(config)# arm (Instant AP)(ARM)# 80mhz-support (Instant AP)(ARM)# a-channels 44 (Instant AP)(ARM)# min-tx-power 18 (Instant AP)(ARM)# max-tx-power 127 (Instant AP)(ARM)# band-steering-mode prefer-5ghz (Instant AP)(ARM)# air-time-fairness-mode fair-access (Instant AP)(ARM)# scanning (Instant AP)(ARM)# client-aware (Instant AP)(ARM)# client-match (Instant AP)(ARM)# wide-bands 5 (Instant AP)(ARM)# end (Instant AP)# commit apply Command History Version Dell Networking W-Series Instant 6.3.1.1-4.0 Dell Networking W-Series Instant 6.2.1.0-3.3 Description This command is modified. This command is introduced. Command Information W-IAP Platform All platforms Command Mode Configuration and ARM configuration sub-mode. 42 | arm Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide