Dell X1000 Series Switches Getting Started Guide - Page 8
Wall Installation
![]() |
View all Dell X1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
3 Make sure that the switch has proper ventilation. Wall Installation To mount the switch on a wall: 1 Make sure that the mounting location meets the following requirements: • The surface of the wall must be capable of supporting the switch. • Allow at least two inches (5.1 cm) space on the sides for proper ventilation and five inches (12.7 cm) at the back for power cable clearance. • The location must be ventilated to prevent heat buildup. 2 Place the supplied wall-mounting bracket on one side of the switch, verifying that the mounting holes on the switch line up to the mounting holes on the wall-mounting bracket. Figure 1-2. Bracket Installation for Wall Mounting 3 Insert the supplied screws into the wall-mounting bracket holes and tighten with a screwdriver. 4 Repeat the process for the wall-mounting bracket on the other side of the switch. 5 Place the switch on the wall in the location where the switch is being installed. 6 Getting Started Guide
![](/manual_guide/products/dell-x1000-series-switches-getting-started-guide-8ee4cae/8.png)