Dell XPS 12 9Q33 Owner's Manual - Page 54
Replacing the Keyboard, Procedure
View all Dell XPS 12 9Q33 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Replacing the Keyboard WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before Working Inside Your Computer" on page 7. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 9. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Procedure CAUTION: Make sure that no cables are placed under the keyboard. 1 Insert the key caps into the slots on the palm-rest assembly and align the screw holes on the keyboard with the screw holes on the palm-rest assembly. 2 Replace the screws that secure the keyboard to the palm-rest assembly. 3 Align the screw holes on the mSATA bracket with the screw holes on the palm-rest assembly. 4 Replace the screws that secure the mSATA bracket to the palm-rest assembly. 5 Slide the keyboard cable into the keyboard-cable connector and press down on the connector latch to secure the cable. CAUTION: Make sure that no cables are placed under the system board. 6 Turn the system board over and align the screw holes on the system board with the screw holes on the palm-rest assembly. 7 Replace the screws that secure the system board to the palm-rest assembly. 8 Connect the display cables to the system board. NOTE: When connecting the display cables to the system board, match the labels (L and R) on the display cables to the labels on the system board. 9 Connect the power-adapter port cable to the system board. 10 Connect the antenna cables to the wireless card, and adhere the Mylar and conductive tape over the antenna cables. 11 Slide the keyboard-backlight cable, the NFC cable, and the touchpad cable in the respective connectors, and press down on the connector latches to secure the cables. 54 | Replacing the Keyboard