Dell XPS 13 9380 XPS 9380 Service Manual - Page 33

Removing the display assembly, Prerequisites, Procedure

Get Dell XPS 13 9380 PDF manuals and user guides View all Dell XPS 13 9380 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

18 Removing the display assembly WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Prerequisites 1 Remove the base cover. 2 Remove the battery. Procedure 1 Remove the screw (M1.6x3) that secures the wireless antenna and camera cable bracket to the system board. 2 Lift the wireless antenna and camera cable bracket from the system board. 3 Disconnect and lift the camera cable from the system board, peeling off the tape securing the camera cable to the fans. 4 Remove the two screws (M1.6x2.5) that secure the display cable bracket to the system board. 5 Lift the display cable bracket from the system board. 6 Disconnect the display cable from the system board. 7 Disconnect the antenna cables from the system board. 8 Remove the four screws (M2.5x4) securing the display hinges to the palm-rest assembly. Removing the display assembly 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
Removing the display assembly
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your computer
. After working inside your computer, follow the instructions in
After working inside
your computer
. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance
.
Prerequisites
1
Remove the
base cover
.
2
Remove the
battery
.
Procedure
1
Remove the screw (M1.6x3) that secures the wireless antenna and camera cable bracket to the system board.
2
Lift the wireless antenna and camera cable bracket from the system board.
3
Disconnect and lift the camera cable from the system board, peeling
off
the tape securing the camera cable to the fans.
4
Remove the two screws (M1.6x2.5) that secure the display cable bracket to the system board.
5
Lift the display cable bracket from the system board.
6
Disconnect the display cable from the system board.
7
Disconnect the antenna cables from the system board.
8
Remove the four screws (M2.5x4) securing the display hinges to the palm-rest assembly.
18
Removing the display assembly
33