Dell XPS 17 9720 Service Manual - Page 23
Fan, Removing the left fan
View all Dell XPS 17 9720 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Steps 1. Align the notch on the solid-state drive with the tab on the SSD2 slot. 2. Slide the solid-state drive into the SSD2 slot. 3. Using the alignment post, place the solid-state drive thermal bracket over the solid-state drive. 4. Align the screw hole on the solid-state drive thermal bracket with the screw hole on the system board. 5. Replace the single (M2x4) screw that secures the solid-state drive thermal bracket and the solid-state drive to the system board. Next steps 1. Install the battery. 2. Install the base cover. 3. Follow the procedure in After working inside your computer. Fan Removing the left fan Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. About this task The following image indicates the location of the left fan and provides a visual representation of the removal procedure. Removing and installing components 23