Dell XPS 17 9720 Service Manual - Page 38
System board, System board callouts, Removing the system board
![]() |
View all Dell XPS 17 9720 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
System board System board callouts 1. Power-button cable 2. Left fan cable 3. Left speaker cable 4. Keyboard cable 5. Antenna cables 6. Right speaker cable 7. Right fan cable 8. Display cable and camera cable Removing the system board Prerequisites 1. Follow the procedure in Before working inside your computer. NOTE: The Service Tag of your computer is stored in the system board. Enter the Service Tag in the BIOS setup program after you replace the system board. NOTE: Replacing the system board removes any changes that you have made to the BIOS using the BIOS setup program. Make the appropriate changes again after you replace the system board. NOTE: Before disconnecting the cables from the system board, note the location of the connectors so that you can reconnect the cables correctly after you replace the system board. 2. Remove the base cover. 3. Remove the battery. 4. Remove the memory module. 5. Remove the M.2 2230 solid-state drive from the SSD1 slot. 6. Remove the M.2 2280 solid-state drive from the SSD2 slot. 7. Remove the heat sink (for systems shipped with integrated graphics) or the heat sink (for systems shipped with discrete graphics). 8. Remove the right fan. 9. Remove the left fan. 10. Remove the I/O board. About this task The following images indicate the location of the system board and provide a visual representation of the removal procedure. 38 Removing and installing components
![](/manual_guide/products/dell-xps-17-9720-service-manual-695463b/38.png)