Dell XPS 8900 Service Manual - Page 77
Removing the front USB-panel, Prerequisites, Procedure
View all Dell XPS 8900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Removing the front USB-panel WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1 Remove the computer cover. 2 Remove the front bezel. Procedure CAUTION: Be extremely careful while sliding the front USB-panel out of the computer. Carelessness may result in damage to the cable connectors and the cable routing clips. NOTE: Note the routing of all cables as you remove them so that you can re-route them correctly after you replace the front USB-panel. 1 Press the securing clip and disconnect the front USB-panel cables from the system board. For more information, see "System-board components". 2 Remove the screw that secures the front USB-panel to the front panel. 3 Slide the front USB-panel down and pull it away from the chassis. 77