Denon 1905 Owners Manual - Page 46
When the surround back speaker setting is set to, 1sp for Speaker Configuration
![]() |
UPC - 081757506236
View all Denon 1905 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
ENGLISH • After adjusting using the test tones, adjust the channel levels either according to the playback sources or to suit your tastes, as (described) below. 1 Select the speaker whose level you want to adjust. The channel switches as shown below each time the button is pressed. FL C FR SR SBR SBL SW SL When the surround back speaker setting is set to "1sp" for "Speaker Configuration", this is set to "SB". "SB" appears only when "POWER AMP ASSIGN" setting is SURR. BACK mode. NOTE: Please make sure the "AUDIO" position of the slide switch on the remote control unit. 2 Adjust the level of the selected speaker. Default setting of channel level is 0 dB. The level of the selected speaker can be adjusted within the range of +12 to -12 dB using the cursor buttons. SW channel level can be turned off by decreasing one step from -12 dB. OFF ´ -12 dB ´ +12 dB 2 2 1 46
![](/manual_guide/products/denon-avr1905-owners-manual-2c124ea/46.png)