Denon 1905 Owners Manual - Page 61
Last Function Memory, Initialization of the Microprocessor, Recalling preset stations
UPC - 081757506236
View all Denon 1905 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Recalling preset stations 12 2 1 ENGLISH 1 Watching the display, press the SHIFT button to select the preset memory block. SHIFT (Main unit) (Remote control unit) NOTE: Please make sure the "AUDIO" position of the slide switch on the remote control unit. 2 Watching the display, press the PRESET • (+) or ª (-) button to select the desired preset channel. ª PRESET • (Main unit) (Remote control unit) 15 LAST FUNCTION MEMORY • This unit is equipped with a last function memory which stores the input and output setting conditions as they were immediately before the power is switched off. This function eliminates the need to perform complicated resettings when the power is switched on. • The unit is also equipped with a back-up memory. This function provides approximately one week of memory storage when the main unit's power switch is off and with the power cord disconnected. 16 INITIALIZATION OF THE MICROPROCESSOR When the indication of the display is not normal or when the operation of the unit does not shows the reasonable result, the initialization of the microprocessor is required by the following procedure. 1 Switch off the unit using the main unit's power switch. 2 Hold the following SPEAKER A button and B button, and turn the main unit's power switch. 3 Check that the entire display is flashing with an interval of about 1 second, and release your fingers from the 2 buttons and the microprocessor will be initialized. 1, 2 2 NOTES: • If step 3 does not work, start over from step 1. • If the microprocessor has been reset, all the button settings are reset to the default values (the values set upon shipment from the factory). 61