Denon 488BA Owners Manual - English - Page 23

Getting Started Connections Setup Playback Remote Control Information Troubleshooting Speaker Setup Perform this setting if you wish to make the settings for your speaker systems manually. a ~ f Speaker Configuration g Subwoofer Mode Setup h ~ A1 Distance A2 Crossover Frequency A3 Test Tone a ~ f Speaker Configuration Select speaker configuration and size. (bass reproduction capability) [Display] 1.Sp 2.In 3.Op Q Speaker Setup Q 1 Front Large Q 4 Subwoofer Yes Front Speaker Select front speaker size. [Selectable items] Large Small Center Speaker Select center speaker use and size. [Selectable items] Large Small None Surround Speaker Select surround speakers use and size. [Selectable items] Large Small None ENGLISH Subwoofer Select subwoofer use. [Selectable items] Yes No Large : S elect this when using large speakers with ample low frequency reproduction capabilities. Small : S elect this when using small speakers without ample low frequency reproduction capabilities. None : S elect this when no speaker is connected. Yes : S elect this when a subwoofer is connected. No : S elect this when no subwoofer is connected. • This can be set when "System Setup" - "Speaker Setup" - "Subwoofer" is set to "Yes". • Play music or a movie source and select the mode offering the strongest bass. • Select "LFE+Main" if you want the bass signals to always be produced from the subwoofer. h ~ A1 Distance Set distance from listening position to speakers. Before making the settings, measure the distance from the listening position to the different speakers. [Display] • Select "Large" or "Small" not according to the physical size of the speaker but according to the low frequency reproduction capabilities based on the frequency set at "Crossover Frequency" (vpage 21). • When "Front Speaker" is set to "Small", "Subwoofer" is automatically set to "Yes". • If "Subwoofer" is set to "No", "Front Speaker" is automatically set to "Large". 1.Sp 2.In 3.Op Q Speaker Setup 6 FL Q 12ft 11 SW Q 12ft g Subwoofer Mode Setup Select low range signal to be reproduced by subwoofer. [Display] 1.Sp 2.In 3.Op Q Speaker Setup Q 5 SW Mode Norm Distance measurement Select the speaker you want to set, then set the distance. Set the value closest to the measured distance. [Variable range] 0ft ~ 60ft : Settable in units of 1 foot. NOTE Set the distance between the listening position and the various speakers to no more than 20 ft. [Selectable items] LFE (Normal) : P lay low range and LFE signal of channels set to "Small". LFE+Main : P lay low range and LFE signal of all channels. Operations (vpage 19) 20