Denon AVR 1609 Owners Manual - English - Page 26

Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting Specifications ENGLISH k ~ A5 Distance Set distance from listening position to speakers. Before making the settings, measure the distance from the listening position to the different speakers. [Display] 1.Sp 2.In 3.Op Q Speaker Setup Q 8 FL : 12ft A6 ~ S1 Crossover Frequency Select crossover frequency from which subwoofer handles low range signal. [Display] 1.Sp 2.In 3.Op Q Speaker Setup Q 16Cr.Over: 80Hz Q 16Cr.Over:Adv • If in the "Advanced" settings, "Subwoofer Mode Setup" (vpage 22) in the "System Setup" is set to "Norm", it is possible to make this setting for speakers set to "Small" at "Speaker Configuration". If set to "+Main", this setting can be made regardless of the speaker size. • For speakers set to "Small", sound below the crossover frequency is cut from the sound output. The cut bass sound is output from the subwoofer or front speakers. • Always set the crossover frequency to "80Hz". When using small speakers, however, we recommend setting the crossover frequency to a higher frequency. 15 SW Q : 12ft Distance measurement Select the speaker you want to set, then set the distance. Set the value closest to the measured distance. [Variable range] 0ft ~ 60ft : Settable in units of 1 foot. Default setting : • FL / FR / C / SW 12 ft • SL / SR / SBL / SBR 10 ft NOTE Set the distance between the listening position and the various speakers to no more than 20 ft. Q 17 Cr.F : 80Hz F : Front, C : Center, S : Surround, SB : Surround Back, LFE : LFE are displayed. Only the portion of the bass sound of the various speakers output from the subwoofer that has a frequency below the frequency set here is output. Set this according to the low frequency reproduction capabilities of the speakers you are using. [Selectable items] 40Hz 60Hz 80Hz 90Hz 100Hz 110Hz 120Hz 150Hz 200Hz 250Hz : Set the Crossover Frequency of all speakers as one. Advanced : Set the Crossover Frequency separately for the different speakers. q When "Cr.Over:Adv" is displayed, press ENTER or i. w Press o p to set the crossover frequency of each speaker. The preset speaker changes each time you press i. [Selectable items] 40Hz 60Hz 80Hz 90Hz 100Hz 110Hz 120Hz 150Hz 200Hz 250Hz b In the case of "LFE", there are 8 modes: 80Hz, 90Hz, 100Hz, 110Hz, 120Hz, 150Hz, 200Hz, 250Hz. S2 Test Tone Adjust channel levels to obtain equal volume from all speakers. [Display] 1.Sp 2.In 3.Op Q Speaker Setup Q 22 T.Tone Yes< Q T.Tone Auto > Q Test Tone On Q Auto-FL Test Tone Select test tone playback method. [Selectable items] Auto : A utomatically switch speaker from which test tone is output. Manual : M anually switch speaker from which test tone is output. 23 For details on how to select, set and cancel settings for each menu, see "System setup operation" (vpage 21).