Denon AVR-1705 Owners Manual - Page 18

Setting Up The System - av

Page 18 highlights

ENGLISH 10 SETTING UP THE SYSTEM • Once all connections with other AV components have been completed as described in "CONNECTIONS" (see pages 10 to 16), make the various settings described below on the display. These settings are required to set up the listening room's AV system centered around the this unit. 1 Set the slide switch to "AUDIO". 2 Use the following buttons to set up the system: SYSTEM SETUP button Press this to display the system setup on the display. CURSOR buttons (•, ª, 0, 1) Press this change what appears on the display. ENTER button Press this to switch the display. Also use this button to complete the setting. • System setup items and default values (set upon shipment from the factory) Speaker Configuration Delay Time System setup Input the combination of speakers in your system and their corresponding sizes (SMALL for regular speakers, LARGE for full-size, full-range) to automatically set the composition of the signals output from the speakers and the frequency response. Front Sp. Large Center Sp. Small Default settings Surround Sp. Surround back Sp. Small Small Subwoofer Yes This parameter is for optimizing the timing with which the audio signals are produced from the speakers and subwoofer according to the listening position. Front L 12 ft Front R 12 ft Center 12 ft Surround L Surround R Surround Back Subwoofer 10 ft 10 ft 10 ft 12 ft Subwoofer Mode This selects the subwoofer speaker for playing deep bass signals. Subwoofer mode = Normal Crossover Frequency Set the frequency (Hz) below which the bass sound of the various speakers is to be output from the subwoofer. 80 Hz Test Tone Digital In Assignment This adjusts the volume of the signals output from the speakers and subwoofer for the different channels in order to obtain optimum effects. This assigns the digital input jacks for the different input sources. Digital Inputs Input source Front L Front R Center 0 dB 0 dB 0 dB COAXIAL OPTICAL1 CD DVD/VDP Surround L Surround R Surround Back Subwoofer 0 dB 0 dB 0 dB 0 dB OPTICAL2 TV/DBS Video Input Mode Set the input signal to be output from the monitor output terminal. AUTO Auto Surround Mode Auto surround mode function setting. Auto Surround Mode = ON Ext. In SW Level Set the Ext. In Subwoofer channel playback level. Ext. In SW Level = +15 dB NOTE: • The system setup is not displayed when "HEADPHONE ONLY" is selected. 18

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75

18
10
SETTING UP THE SYSTEM
Once all connections with other AV components have been completed as described in “CONNECTIONS” (see pages 10 to 16), make the
various settings described below on the display.
These settings are required to set up the listening room’s AV system centered around the this unit.
SYSTEM SETUP button
Press this to display the system setup on the display.
CURSOR buttons (
,
ª
,
0
,
1
)
Press this change what appears on the display.
ENTER button
Press this to switch the display.
Also use this button to complete the setting.
System setup items and default values (set upon shipment from the factory)
System setup
Default settings
Speaker
Configuration
Subwoofer Mode
Digital In
Assignment
Input the combination of speakers in your system and their
corresponding sizes (SMALL for regular speakers, LARGE for full-size,
full-range) to automatically set the composition of the signals output
from the speakers and the frequency response.
This assigns the digital input jacks for the different input
sources.
Input
source
Digital
Inputs
Front Sp.
Large
Center Sp.
Surround Sp.
Subwoofer
Small
Small
Yes
CD
DVD/VDP
COAXIAL
OPTICAL1
Delay Time
This parameter is for optimizing the timing with which the audio
signals are produced from the speakers and subwoofer according to
the listening position.
1
Set the slide switch to “AUDIO”.
2
Use the following buttons to set up the system:
This selects the subwoofer speaker for playing deep bass signals.
Subwoofer mode = Normal
NOTE:
The system setup is not displayed when “HEADPHONE ONLY” is selected.
Crossover
Frequency
Set the frequency (Hz) below which the bass sound of the various
speakers is to be output from the subwoofer.
80 Hz
Auto Surround
Mode
Auto surround mode function setting.
Auto Surround Mode = ON
Ext. In SW Level
Set the Ext. In Subwoofer channel playback level.
Ext. In SW Level = +15 dB
Surround back Sp.
Small
Front L
Center
Surround Back
12 ft
12 ft
10 ft
Subwoofer
12 ft
Front R
12 ft
Surround L
10 ft
Surround R
10 ft
Front L
Front R
Center
0 dB
0 dB
0 dB
Test Tone
This adjusts the volume of the signals output from the speakers and
subwoofer for the different channels in order to obtain optimum
effects.
Surround L
0 dB
Surround R
0 dB
Surround Back
0 dB
Subwoofer
0 dB
Video Input Mode
Set the input signal to be output from the monitor output terminal.
AUTO
TV/DBS
OPTICAL2
ENGLISH