Denon AVR-2112CI AVR-2112CI Owners Manual - Page 74
Playback, Adjusting the volume, ZONE2 playback by speaker output, Turning off the sound temporarily
UPC - 883795001991
View all Denon AVR-2112CI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Basic version Advanced version Playback 1 Press ZONE SELECT to switch the zone mode to K (ZONE2). 2 Press AMP to set the remote control unit to AMP-operation mode. Adjusting the volume (for "q ZONE2 playback by speaker output") Use M df to adjust the volume. 3 Press ZONE/DEVICE Z to turn on the ZONE2 power. The indicator on the display lights. • Also press input source select button when in standby mode, the power turns on. • When ZONE/DEVICE X is pressed, ZONE2 turns off. • Power in ZONE2 can be turned on or off by pressing ZONE2 ON/OFF on the main unit. Input source select buttons GAdjustable rangeH - - - -80dB - -40dB - 18dB (When the "Volume Display" (vpage 95) setting is "Relative") GAdjustable rangeH 0 - 41 - 99 (When the "Volume Display" (vpage 95) setting is "Absolute") • At time of purchase, "Volume Limit" (vpage 94) is set to "-10dB (71)". 4 Press the input source select button. The audio signal of the selected source is output to ZONE2. • To perform an operation with the main unit, press ZONE2 SELECT many times. When power for both MAIN ZONE and ZONE2 is set to ON, power of the MAIN ZONE only can be turned off. Select J (MAIN ZONE) in step 1 then press ZONE/DEVICE X. • Turn MASTER VOLUME after pressing ZONE2 SELECT on the main unit to adjust the sound volume. • For "w ZONE2 playback by audio output", adjust the volume on the connected amplifier. Turning off the sound temporarily Press N. The sound is reduced to the level set at "Mute Level" (vpage 94) in the menu. • To cancel, either adjust the volume or press N again. • The setting is canceled when the zone's power is turned off. vSee overleaf Information BD 71