Denon AVR-2311CI Literature/Product Sheet - Page 2

State-of-the-art Denon Solutions for Maximizing Content Quality • Fully discrete, identical quality and power for all 7 channels (105 W x 7ch) To faithfully reproduce the original surround sound, each of the AVR-2311CI's 7 channels is equipped with the same power amp of equal power. Since these power amps also use discrete circuits configured with parts strictly selected for their contribution to high sound quality, rather than with low-cost integrated circuits (ICs), the surround sound playback is of impeccably high quality. • Featuring 3D pass-through technology By connecting a 3D-compliant Blue-ray disc player and 3Dcompliant TV to the AVR-2311CI, you will have a 3D home theater where you can enjoy high-definition sound and video on a level you've never experienced before. • Supports HDMI 1.4a with 3D, Audio Return Channel, Deep Color, "x.v.Color" , Auto Lipsync and HDMI control function When you connect the AVR-2311CI to a TV with a single HDMI cable, it supports Audio Return Channel (ARC)(*1) that can play back the TV audio in surround sound. Until now, if you wanted to enjoy surround sound from a TV, you needed to use an optical digital cable or coaxial digital cable to bring sound from the TV to the A/V receiver. The AVR-2311CI's ARC feature, however, helps you keep cable connections neat and out of the way as you build your home theater. *1: The TV must also support ARC. • High-definition audio support The 32 bit floating point DSP chip in the surround decoder handles the latest audio formats, including Dolby TrueHD and DTS-HD Master Audio, found on popular Blu-ray titles. • Dolby Pro Logic IIz For a broadly wide and stunningly high front soundstage, the AVR-2311CI is equipped with Dolby Pro Logic IIz processing. By connecting Front Height speakers and using Dolby Pro Logic IIz playback, you will be able to experience a dramatically expanded front soundstage. Main Specifications Power amplifier section Rated output *THD figures are power amp stage values. Front L/R 105 W + 105 W (8 ohms, 20 Hz - 20 kHz, THD 0.08 %) 135 W + 135 W (6 ohms, 1 kHz, THD 0.7%) Center 105 W (8 ohms, 20 Hz - 20 kHz, THD 0.08 %) 135 W (6 ohms, 1 kHz, THD 0.7%) Surround L/R 105 W + 105 W (8 ohms, 20 Hz - 20 kHz, THD 0.08 %) 135 W + 135 W (6 ohms, 1 kHz, THD 0.7%) Surround Back L/R 105 W + 105 W (8 ohms, 20 Hz - 20 kHz, THD 0.08 %) 135 W + 135 W (6 ohms, 1 kHz, THD 0.7%) Denon Electronics (USA), LLC. 100 Corporate Drive, Mahwah, New Jersey 07430 USA TEL: 201-762-6500 usa.denon.com • High-bit I/P Converter and Scaler up to 1080p The AVR-2311CI uses a high-performance video up-scaler to convert SD (standard definition) video material to HD (high definition) quality. This means that the 480i/480p (SD-quality) video signals of DVD programs and other material are converted to the high-quality 1080p signal of HD video, and output to the HDMI port. The fuzziness in the details of SD video is removed to produce a clear picture. Now you can enjoy not only your DVDs but also your VCR tapes and games with much greater clarity and detail. • Minimum Signal Path for clear audio and video signal The "simple and straight" design concept has been thoroughly implemented in the signal paths to contribute to immaculately clean audio and video playback. Signal paths are as short as possible to keep signal degradation in the audio and video circuitry to an absolute minimum • Direct Mechanical Ground Construction, embodying concepts for thorough vibration resistance Vibration-resistant construction has been reviewed to thoroughly suppress the adverse influences of vibration on sound quality. The power transformers, a source of vibration, have been securely mounted on the highly rigid bottom chassis. Direct mounting of cast-iron feet to the radiator in near proximity to each other serves to suppress mutual vibration with the power transformers and other sources of vibration. Connectivity & Future-ready Expandability • 6 x HDMI in / 1 x HDMI out (Repeater) • Direct play for iPod and iPhone via USB You can also listen to music files from your iPod by simply connecting it to the AVR-2311CI's USB port with the USB cable that came with the iPod. To start play, just press the iPod Play button on the AVR-2311CI or its remote control unit. Digital signals from the iPod are transmitted as is to the AVR-2311CI where they pass through the compressed audio restorer and are processed by advanced audio circuitry to produce a clean, high-quality sound. Preamplifier section Input sensitivity/impedance 200 mV / 47 kΩ/kohms Frequency response 10 Hz ~ 100 kHz - +1, -3 dB (DIRECT mode) S/N Ratio 100 dB (IHF-A weighted, DIRECT mode) FM section Tuning frequency range Usable sensitivity 87.5 - 107.9 MHz 1.0 µV (11.2 dBf) AM section Tuning frequency range Usable sensitivity 520 - 1710 kHz 18 µV General Power supply Power consumption Dimensions (W x H x D) Weight AC 120 V, 60 Hz 600 W (Standby 0.1 W) 17-3/32" x 6-47/64" x 15" 434 x 171 x 381 mm 23 lbs 13 oz, 10.8 kg Denon Canada Inc. 505 Apple Creek Blvd, Unit 5, Markham, Ontario, Canada L3R 5B1 TEL: 905-475-4085 ca.denon.com • Dock connectivity for iPod and network streaming Network music can be enjoyed via the Denon Networked Control Dock. (Requires separately-sold ASD-51W or ASD-51N.) • Power Amp Assign function, for versatility in using the AVR-2311CI for different purposes The AVR-2311CI supports up to 7.2 channels (FL/ FR/ C/ SL/ SR/ SBL/ SBR/ SW1/ SW2) for surround playback defined by the Blu-ray disc format. To enjoy surround playback with the AVR-2311CI's Dolby Pro Logic IIz, you can reassign the power amp from the two surround back channels (SBL/SBR) to the two front high channels (FHL/FHR). Or by assigning the SBL/ SBR power amp to Zone 2, you can enjoy multi-room audio playback, or to achieve higher-quality sound for 2-channel stereo playback, you can configure the AVR-2311CI for front bi-amp operation. These are just some of the ways you can arrange the AVR-2311CI's amps to suit various listening styles. Ease-of-use • On-Board GUI via HDMI output (up to 1080p) The AVR-2311CI is equipped with an easy-to-view Graphical User Interface (GUI) featuring visual menu displays. These menu displays can also be output to the monitor over HDMI. • Newly developed pre-memory remote control with Glo-Key buttons • Remote Setup Guidance via On-Screen Display • Three Quick Select buttons • Auto surround mode • Sleep timer function • Audio Delay function (max. 6 frames or 200 mSec) • Muting level settings (Full/-40dB/-20dB) • Audio level memory, capable of correcting different signal levels for each input device • Variable subwoofer crossover switching Custom Integration • Control4, AMX, Crestron third party control support via RS-232C • 150 mA Trigger output • IR Remote in/out ports Ports In Out Other HDMI Component S-Video Composite (Video) Analog Audio (Tuner included) Digital Optical Digital Coaxial HDMI Monitor Component Monitor Composite Monitor Composite (DVR)
 Audio Preout (SW)
 Audio Preout (Zone2 L/R) Audio REC out Phones Digital Optical USB port Microphone Port Dock Control Port FM Tuner Antenna AM Tuner Antenna Remote Control In/Out RS-232C DC12V 150mA MAX. trigger out x 6 x 2 x 2 x 4 x 8 x 2 x 2 x 1 x 1 x 1 x 1 x 2 x 1 x 1 x 1 x 1 x 1 x 1 x 1 x 1 x 1 In 1 / Out 1 x 1 x 1 *Design and specifications are subject to change without notice. *"Dolby", "Pro Logic" and the double-D symbol are trademarks of Dolby Laboratories. *DTS is a registered trademark and the DTS logos, Symbol, DTS-HD and DTS-HD Master Audio are trademarks of DTS, Inc. *HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. *Audyssey MultEQ® is a registered trademark of Audyssey Laboratories. Audyssey Dynamic EQ® is a trademark of Audyssey Laboratories. Audyssey Dynamic Volume™ is a trademark of Audyssey Laboratories. *"Made for iPod" means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards. *"Works with iPhone" means that an electronic accessory has been designed to connect specifically to iPhone and has been certified by the developer to meet Apple performance standards. *Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. *iPod is a trademark of Apple Inc., registered in the U.S. and other countries. *iPhone is a trademark of Apple Inc. Denon Brand Company D&M Building, 2-1 Nisshin-cho, Kawasaki-ku, Kawasaki-shi, Kanagawa, 210-8569, Japan www.denon.com 17800410 A