Denon AVR-2801 Owners Manual - Page 35

Recording using the REC OUT selector 1 Press the REC SELECT button. REC SELECT ENGLISH (Main unit) 2 With "REC OUT SOURCE" displayed, turn the FUNCTION knob to select the source you wish to record. • The "REC" indicator and the indicator of the selected source light. FUNCTION (Main unit) 3 Set the recording mode. • For operating instructions, refer to the manual of the component on which you want to record. 4 To cancel, turn the function knob and select "SOURCE". FUNCTION Display NOTES: • Digital signals are not output from output jacks. • Only the currently playing source can be recorded to CDR/TAPE. (Main unit) Playback using the external input (EXT. IN) jacks 1 Set the external input (EXT. IN) mode. EXT.IN EXT.IN Press the EXT. IN to switch the external input. (Main unit) (Remote control unit) Once this is selected, the input signals connected to the FL (front left), FR (front right) and C (center) channels of the EXT. IN jacks are output directly to the front (left and right) and center speaker systems as well as the pre-out jacks without passing through the surround circuitry. In addition, the signal input to the SW (subwoofer) jack is output to the PRE OUT SUBWOOFER jack. 2 Cancelling the external input mode To cancel the external input (EXT. IN) setting, press the INPUT MODE (AUTO, PCM, DTS) or ANALOG button to switch to the desired input mode. (See page 32.) INPUT MODE ANALOG INPUT MODE ANALOG (Main unit) (Remote control unit) • When the input mode is set to the external input (EXT. IN), the play mode (DIRECT, STEREO, DOLBY/DTS SURROUND, 5CH STEREO or DSP SIMULATION) cannot be set. 2 VOLUME DISC SKIP+ SPEAKER DOLBY / DTS SURROUND DIRECT DSP SIMULATION 5CH STEREO INPUT MODE ANALOG STEREO EXT.IN MASTER VOL. AUDIO DECK CDR/MD CD MUTING AVR/AVC VIDEO TUNING DVD TV VDP VCR SYSTEM SETUP SURROUND PARAMETER BAND MODE TITLE MENU/GUIDE CH SELECT ENTER SELECT 1 NOTES: • In play modes other than the external input mode, the signals connected to these jacks cannot be played. In addition, signals cannot be output from channels not connected to the input jacks. • The external input mode can be set for any input source. To watch video while listening to sound, select the input source to which the video signal is connected, then set this mode. 35