Denon AVR-2803 Owners Manual - Page 53
Dolby Digital mode only with digital input and DTS Surround mode only with digital input
View all Denon AVR-2803 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Dolby Digital mode (only with digital input) and DTS Surround mode (only with digital input) 1 Select the input source. Playback with a digital input q Select an input source set to digital (COAXIAL/OPTICAL) (see page 23). FUNCTION 1 3 (Main unit) (Remote control unit) w Set the input mode to "AUTO" or "DTS". (Main unit) (Remote control unit) 2 Select the Dolby/DTS Surround mode. (Remote control unit) When performing this operation from the main unit's panel, press the SURROUND MODE button, then turn the SELECT knob and select Dolby Pro logic II or DTS NEO:6. SELECT (Main unit) (Main unit) 3 Play a program source with the , mark. DIGITAL Light • The Dolby Digital indicator lights when playing Dolby Digital sources. • The DTS indicator lights when playing Light DTS sources. SIGNAL DETECT Light • The SIGNAL DETECT LED lights when playing 6.1-channel surround sources containing the identification signal. When the SIGNAL DETECT LED is lit, we recommend turning the surround back channel using the SURROUND BACK button on the remote control unit and main unit during playback. To use DTS 96/24 sources with the optimum system, we recommend turning the surround back channel off. Operate the SURROUND BACK button to switch Surround Back CH ON/OFF. 1 3 2 4,5 2,6 1 2 4 5, 6 3 1 (Main unit) (Remote control unit) SURROUND BACK CH OUTPUT Light • Lights when the Surround Back CH is on. 53