Denon AVR 2808CI Owners Manual - English - Page 29

Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting Manual Setup Make detail settings for various parameters. Speaker Setup Use this procedure to set the speakers manually or if you wish to change the settings made with the auto setup procedure. F Menu screen F MENU 1.Auto Setup 2.Manual Setup 3.Input Setup 4.Parameter 5.Information 2.Manual Setup 1.Speaker Setup 2.HDMI Setup 3.Audio Setup 4.Zone Setup 5.Option Setup a Speaker Configuration Select speaker configuration and size. (bass reproduction capability) Front Speaker Select front speaker size. [Selectable items] Large Small Center Speaker Select center speaker use and size. [Selectable items] Large Small None Subwoofer Select subwoofer use. [Selectable items] Yes No Surround Speaker Select surround speakers use and size. [Selectable items] Large Small None s Subwoofer Setup Select low range signal to be reproduced by subwoofer. [Selectable items] Surround Back Speaker Select surround back speaker use and size. ( ) [Selectable items] Large Small None ( ) 2spkrs 1spkr NOTE By default, the AVR-2808CI's "Amp Assign" setting is set to "ZONE2". To use as the surround back speaker for the main zone, change the "Amp Assign" setting (vpage 31). LFE : P lay low range and LFE signal of channels set to "Small". LFE+Main : P lay low range and LFE signal of all channels. • This can be set when menu "Speaker Configuration" - "Subwoofer" is set to "Yes". • Play music or a movie source and select the mode offering the strongest bass. • Select "LFE+Main" if you want the bass signals to always be produced from the subwoofer. Large : S elect this when using large speakers with ample low frequency reproduction capabilities. Small : S elect this when using small speakers without ample low frequency reproduction capabilities. None : S elect this when no speaker is connected. d Distance Set distance from listening position to speakers. Before making the settings, measure the distance from the listening position to the different speakers. Yes : S elect this when a subwoofer is connected. No : S elect this when no subwoofer is connected. 2spkrs 1spkr : Select the number of surround back speakers. • Select "Large" or "Small" not according to the physical size of the speaker but according to the low frequency reproduction capabilities based on the frequency set at "Crossover Frequency" (vpage 27). • When "Front Speaker" is set to "Small", "Subwoofer" is automatically set to "Yes". • If "Subwoofer" is set to "No", "Front Speaker" is automatically set to "Large". • If "Surround Speaker" is set to "None", "Surround Back Speaker" are automatically set to "None". • When using just one surround back speaker, connect it to the left channel (SBL). Feet / Meters Select unit for distance. Step Select step. (smallest distance) [Selectable items] 1ft 0.1ft : C an be selected when "Feet" is set. 0.1m 0.01m : C an be selected when "Meters" is set. Default Resets the settings to the default values. 26