Denon AVR-3803S Operating Instructions - Page 77

There are two types of DVD Dolby surround recording signals. CI 2-channel PCM stereo signals © 2-channel Dolby Digital signals When either of these signals is input to the AVR-3803/1083, the surround mode is automatically set to Dolby Pro Logic H when the "DOLBY/DTS SURROUND" mode is selected. I Sources recorded in Dolby Surround are indicated with the logo mark shown below. Dolby Surround support mark: 00 °o18/ sunnouno Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic" "Surround EX" and the double-D symbol are trademarks of Dolby Laboratories. DTS Digital Surround Digital Theater Surround (also called simply DTS) is a multi-channel digital signal format developed by Digital Theater Systems. DTS offers the same "5.1" playback channels as Dolby Digital (front left, front right and center, surround left and surround right) as well as the stereo 2-channel mode. The signals for the different channels are fully independent, eliminating the risk of deterioration of sound quality due to interference between signals, crosstalk, etc. DTS features a relatively higher bit rate as compared to Dolby Digital (1234 kbps for CDs and LDs, 1536 kbps for DVDs) so it operates with a relatively low compression rate. Because of this the amount of data is great, and when DTS playback is used in movie theaters, a separate CD- ROM synchronized with the film is played. With LDs and DVDs, there is of course no need for an extra disc; the pictures and sound can be recorded simultaneously on the same disc, so the discs can be handled in the same way as discs with other formats. There are also music CDs recorded in DTS. These CDs include 5.1-channel surround signals (compared to two channels on current CDs). They do not include picture data, but they offer surround playback on CD players that are equipped with digital outputs (PCM type digital output required). DTS surround track playback offers the same intricate, grand sound as in a movie theater, right in your own listening room. • DTS compatible media and playback methods DIGITAL dt s dis Marks indicating DTS compatibility: and SURROUND The following are general examples. Also refer to the player's operating instructions. Media CD LD (VDP) DVD Dolby Digital output lacks Optical or coaxial digital output (same as for PCM) x 2 Optical or coaxial digital output (same as for PCM) x 2 Optical or coaxial digital output (same as for PCM) 3 Playback method (reference page) Set the input mode to "AUTO" or "DTS" (page 48). Never set the mode to "ANALOG" or "PCM". x 1 Set the input mode to "AUTO" or "DTS" (page 48). Never set the mode to "ANALOG" or "PCM". at 1 Set the input mode to "AUTO" or "DTS" (page 48). 1 DTS signals are recorded in the same way on CDs and LDs as PCM signals. Because of this, the un-decoded DTS signals are output as random "hissy" noise from the CD or LD player's analog outputs. If this noise is played with the amplifier set at a very high volume, it may possibly cause damage to the speakers. To avoid this, be sure to switch the input mode to "AUTO" or "DTS" before playing CDs or LDs recorded in DTS. Also, never switch the input mode to "ANALOG" or "PCM" during playback. The same holds true when playing CDs or LDs on a DVD player or LD/DVD compatible player. For DVDs, the DTS signals are recorded in a special way so this problem does not occur. Sf 2 The signals provided at the digital outputs of a CD or LD player may undergo some sort of internal signal processing (output level adjustment, sampling frequency conversion, etc.). In this case the DTS-encoded signals may be processed erroneously, in which case they cannot be decoded by the AVR-3803/1083, or may only produce noise. Before playing DTS signals for the first time, turn down the master volume to a low level, start playing the DTS disc, then check whether the DTS indicator on the AVR-3803/1083 (see page 59) lights before turning up the master volume. A DVD player with DTS-compatible digital output is required to play DTS DVDs. A DTS Digital Output logo is featured on the front panel of compatible DVD players. Recent DENON DVD player models feature DTS-compatible digital output - consult the player's owner's manual for information on configuring the digital output for DTS playback of DTS-encoded DVDs. Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942, 5,956,674, 5,974,380, 5,978,762 and other world-wide patents issued and pending. "DTS","DTS-ES Extended Surround" and "Neo:6" are trademarks of Digital Theater Systems, Inc. ©1996, 2000 Digital Theater Systems, Inc. All Rights Reserved. 77