Denon AVR-3808CI Owners Manual - English - Page 7

GUI Menu Map Setup Playback Information Troubleshooting ENGLISH s Preset Skip Set the preset memories that you do not want to display when tuning. A ~ G Select the preset channel(s) you do not want to display. [Input source] SIRIUS [Selectable items] All 1 2 3 4 5 6 7 8 [Selectable items] ON Skip When set "All" to "Skip", it is possible to skip entire preset memory blocks (A to G). d Parental Lock For any channel, set the radio reception limits. [Input source] SIRIUS Lock Setting Set the channel radio reception limits. q Press ENTER. w Using uio p, input the password (4 digits number) and press ENTER. e Select channel by pressing ui, and set the lock by pressing o p. [Selectable items] Unlock : Do not lock selected channel(s). Lock : Lock selected channel(s). b When a Parental Locked channel is tuned, "Code is displayed, then input the password. Edit Lock Code Change the password. q Press ENTER. w Select "Current Lock Code" and press ENTER. e Enter the current Lock Code using uio p. r Press ENTER to confirm. t Select "New Lock Code" and enter a new Lock Code using steps q to e above. y Select "Repeat Code" and re-enter the new Lock Code using steps q to e above. u Select "Execute" and press ENTER. • If the old password is incorrectly input, "Current Lock Code Incorrect" is displayed, and proceed again from step q. • If the password input is 3 digits or less, "Enter 4 digits number" is displayed, and input again with a 4 digit password. • If the new password is not correctly input, "New Lock Code Disagreement" is displayed and the password does not change. f Antenna Aiming Check the SIRIUS radio reception sensitivity. [Input source] SIRIUS Satellite Indicate satellite signal strength. Terrestrial Indicate terrestrial signal strength. n SIRIUS Antenna Aiming Display Condition Signal strength is excellent Signal strength is good Signal strength is weak No signal g Assign Assign input sources to input connectors. HDMI Select HDMI connector to assign to this source. [Input source] DVD HDP TV/CBL SAT VCR DVR V.AUX [Selectable items] 1 2 3 4 None Input source DVD HDP TV/CBL SAT Default setting HDMI1 HDMI2 HDMI3 None VCR DVR V.AUX None HDMI4 None When "HDMI Control" is set to "ON", the HDMI connector assignment changes as follows. Input source DVD HDP TV/CBL SAT VCR DVR V.AUX Default setting HDMI1 HDMI2 None HDMI3 None HDMI4 None • With HDMI, the video and audio signals are transferred simultaneously. To play the video signal assigned at "HDMI" combined with the audio signal assigned at "Digital", select "Digital" at GUI menu "Source Select" - "Input Mode". • When the AVR-4308CI / AVR-3808CI and monitor are connected with an HDMI cable, if the monitor is not compatible with HDMI audio signal playback, only the video signals are output to the monitor. • The audio signals input from the analog, digital and EXT. IN connectors are not output to the monitor. NOTE • This cannot be set for input sources for which "iPod dock" or "SIRIUS" is assigned. • When "HDMI Control" (vpage 4) is set to "ON", HDMI cannot be assigned to "TV/CBL". Digital • The default password is "0000". • If the password is wrong, "Incorrect Code" is displayed. Input the correct password. • While listening to the channel being played, you can also set parental lock (vpage 12). Select digital input connector to assign to this source. [Input source] CD DVD HDP TV/CBL SAT ( ) VCR DVR V.AUX SIRIUS [Selectable items] Coaxial1 ~ 3 Optical1 ~ 4 DENON LINK z None