Denon AVR 788 Owners Manual - English - Page 32

Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting ENGLISH s Volume Control Set the main zone volume setting. Volume Limit Make a setting for maximum volume. [Selectable items] OFF : Do not set a maximum volume. -20dB : Set the maximum volume to -20 dB. -10dB : Set the maximum volume to -10 dB. 0dB : Set the maximum volume to 0 dB. Power On Level This sets the volume set when the main zone's power is turned on. [Selectable items] Last : Use the memorized setting from the last session. - - - : Always use the muting on condition when power is turned on. -80dB ~ +18dB : Set the volume level when the power is turned on in units of 1 dB. Mute Level This sets the amount of attenuation of the volume when the mute mode is set in the main zone. [Selectable items] Full : The sound is cut off entirely. -40dB : The sound is attenuated by 40 dB. -20dB : The sound is attenuated by 20 dB. d Source Delete Remove input sources that are not used from the display. [Selectable items] ON : Use this source. Delete : Do not use this source. NOTE • Input sources being used in the various zones cannot be deleted. • Input sources set to "Delete" cannot be selected using the SOURCE SELECT knob on the main unit or SOURCE SELECT button on the remote control unit. f On-Screen Display Make on-screen display related settings. Screensaver Make screensaver settings. Use the screensaver to prevent burn-in on the monitor screen. When set to "ON", the screensaver is activated if there is no activity for about 3 minutes. [Selectable items] ON : A ctivate the screensaver if there is no activity for about 3 minutes. OFF : T urn the screensaver function off. Text Input source and mode display. [Selectable items] ON : T urn display on. OFF : T urn display off. Master Volume Master volume display during adjustment. [Selectable items] ON : T urn display on. OFF : T urn display off. Tuner Information This sets the time the on-screen display is displayed when an operation is performed. [Selectable items] Always : Show display continuously. 30sec : Show display for 30 seconds after operation. 10sec : Show display for 10 seconds after operation. OFF : Turn display off. iPod Information This sets the time the on-screen display is displayed when an operation is performed. [Selectable items] Always : Show display continuously. 30sec : Show display for 30 seconds after operation. 10sec : Show display for 10 seconds after operation. OFF : Turn display off. Display Mode Select the on-screen display's display mode. [Selectable items] Mode1 : If there is no video signal, flickering of the on-screen display is not prevented. Mode2 : P revents flickering of the on-screen display when there is no video signal. Use this mode if the on-screen display does not appear in the Mode 1, as may happen according to the TV being used. 29