Denon AVR 788 Owners Manual - English - Page 49

Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting Other Operations and Functions Other Operations Recording on an External Device (REC OUT mode) You can listen to one program source while recording a different program source. 1 Press . "ZONE2 SOURCE" is shown on the display. ZONE2 SOURCE ZONE2 TUNER ···· ZONE2 XM RECOUT XM ······ RECOUT TUNER RECOUT SOURCE ENGLISH • To cancel, press , then turn until "ZONE2 SOURCE" is displayed. • Make a test recording before starting the actual recording. • Sources selected with the REC OUT mode are output from ZONE2 as well. • In the REC OUT mode, the remote control unit's ZONE2 mode buttons cannot be operated. • The "XM" digital audio output signals are not output from the OPTICAL2 output connectors. • The source selected for MAIN ZONE is output from the digital output connector (OPTICAL 2). The source selected in the REC SELECT mode is not associated with the output from the digital output connector (OPTICAL 2). NOTE • Digital signals are not output from the analog REC OUT connector. • Recordings you make are for your personal enjoyment and should not be used for other purposes without permission of the copyright holder. • Input sources for which "Delete" is selected at "Source Delete" cannot be selected. Fader Function This function lets you adjust (fade) the sound from all the front or rear speakers at once. 1 Press or [CH SELECT]. 2 Press ui, or [CH SELECT] to select "Fader". 3 Use o p to adjust the volume of the speakers. (o: front, p: rear) • The fader function does not affect the subwoofer. • The fader can be adjusted until the volume of the speaker adjusted to the lowest value is -12 dB. 2 Turn until "RECOUT SOURCE" is displayed. The " " indicator lights. 3 Turn to choose the input source to be recorded. 4 Play the program source. For operating instructions, refer to the respective equipment's operating instructions. To record FM or AM broadcasts, select the broadcast (vpage 42). Convenient Functions Channel Level You can adjust the channel level either according to the playback sources or to suit your taste, as described below. 1 Press or [CH SELECT]. Channel Volume FL 0.0dB SR 0.0dB C 0.0dB SBR 0.0dB FR 0.0dB SBL 0.0dB SW 0.0dB SL 0.0dB 5 Start recording. For operating instructions, refer to the respective equipment's operating instructions. Fader FRONT : REAR 2 Use ui, or [CH SELECT] to select the speaker. The speaker that can be set switches each time one of the buttons is pressed. 3 Use o p to adjust the volume. b "OFF" can be set by pressing o when the subwoofer's volume is set to -12 dB. 46