Denon AVR-891 Owners Manual - English - Page 16

Simple version Basic version Advanced version ENGLISH Connections Important information • Connect this unit as follows before using. Make connections according to the equipment you are connecting. • Some settings of this unit may be necessary depending on the connection method. Check each connection item for more information. • Select the cables (sold separately) according to the components being connected. NOTE • Do not plug in the power cord until all connections have been completed. • When making connections, also refer to the operating instructions of the other components being connected. • Be sure to connect the left and right channels properly (left with left, right with right). • Do not bundle power cords together with connection cables. Doing so can result in noise. Converting input video signals for output (Video conversion function) This unit is equipped with four types of video input connectors (HDMI, Component video, S-Video and video) and two types of video output connectors (HDMI, Component video and video). Use the connectors corresponding to the components to be connected. This function automatically converts various formats of video signals input to this unit into the formats used to output the video signals from this unit to a monitor. GFlow of video signals for MAIN ZONEH Video device This unit Monitor • The video conversion function supports the NTSC, PAL, SECAM, NTSC 4.43, PAL-N, PAL-M and PAL-60 formats. • The resolution of the video signal input to this unit's HDMI connector is the resolution set at "Resolution" (vpage 48) (1080p HDMI signals and 1080p component signals are output at 1080p, regardless of the setting). • Resolutions of HDMI-compatible TVs can be checked at "HDMI Monitor Information" (vpage 62). NOTE Output Input (IN) Output (MONITOR OUT) Input • HDMI signals cannot be converted into analog signals. • When a non-standard video signal from a game machine or some other source is input, the video conversion function might not operate. • Component video input signals cannot be converted into Video format. • A menu is output via the HDMI connector or component video connector. HDMI connector Component video connectors HDMI connector Component video connectors HDMI connector Component video connectors HDMI connector Component video connectors Examples of on-screen display • Menu screen • Status display screen When the input source is switched MENU • When the volume is adjusted S-Video connector S-Video connector Audio/Video Adjust Information Auto Setup Manual Setup Input Setup Video connector Video connector Video connector in Set as Necessary • Set when not using the video conversion function. "Video Convert" (vpage 47) • Set when changing the resolution of the video signal. "Resolution" (vpage 48) Video connector Adjust various audio and video parameters Input BD Mode STEREO Auto Master Volume -80.0dB Status display: The operating status is displayed temporarily on the screen when the input source is switched or the volume is adjusted. Information 13