Denon AVR-891 Owners Manual - English - Page 85
Specifications
UPC - 883795001373
View all Denon AVR-891 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
ENGLISH Resetting the microprocessor Perform this procedure if the display is abnormal or if operations cannot be performed. When the microprocessor is reset, all the settings are reset to their default values. ON/STANDBY SURROUND MODE 1 SURROUND MODE 0 1 Turn off the power using ON/STANDBY. 2 Press ON/STANDBY while simultaneously pressing SURROUND MODE 0 and SURROUND MODE 1. 3 Once the display starts flashing at intervals of about 1 second, release the two buttons. If in step 3 the display does not flash at intervals of about 1 second, start over from step 1. 82 Specifications nn Audio section • Power amplifier Rated output: Output connectors: • Analog Input sensitivity/Input impedance: Frequency response: S/N: nn Video section • Standard video connectors Input/output level and impedance: Frequency response: • Color component video connector Input/output level and impedance: Frequency response: nn Tuner section Receiving Range: Usable Sensitivity: 50 dB Quieting Sensitivity: S/N (IHF-A): Total harmonic Distortion (at 1 kHz): nn General Power supply: Power consumption: Maximum external dimensions: Weight: nn Remote Control Unit (RC-1146) Batteries: Maximum external dimensions: Weight: Front: 105 W + 105 W (8 Ω, 20 Hz - 20 kHz with 0.08 % T.H.D.) 135 W + 135 W (6 Ω, 1 kHz with 0.7 % T.H.D.) Center: 105 W (8 Ω, 20 Hz - 20 kHz with 0.08 % T.H.D.) 135 W (6 Ω, 1 kHz with 0.7 % T.H.D.) Surround: 105 W + 105 W (8 Ω, 20 Hz - 20 kHz with 0.08 % T.H.D.) 135 W + 135 W (6 Ω, 1 kHz with 0.7 % T.H.D.) Surround back: 105 W + 105 W (8 Ω, 20 Hz - 20 kHz with 0.08 % T.H.D.) 135 W + 135 W (6 Ω, 1 kHz with 0.7 % T.H.D.) 6 - 16 Ω 200 mV/47 kΩ 10 Hz - 100 kHz - +1, -3 dB (DIRECT mode) 100 dB (IHF-A weighted, DIRECT mode) 1 Vp-p, 75 Ω 5 Hz - 10 MHz - +1, -3 dB Y (brightness) signal - 1 Vp-p, 75 Ω PB / CB signal - 0.7 Vp-p, 75 Ω PR / CR signal - 0.7 Vp-p, 75 Ω 5 Hz - 60 MHz - +0, -3 dB (when "Video Convert" set to "OFF") [FM] (Note: μV at 75 Ω, 0 dBf = 1 x 10-15 W) 87.5 MHz - 107.9 MHz 1.2 μV (12.8 dBf) MONO 2.8 μV (20.2 dBf) STEREO 48.7 μV (45 dBf) MONO 70 dB STEREO 67 dB MONO 0.7 % STEREO 1.0 % [AM] 520 kHz - 1710 kHz 18 μV AC 120 V, 60 Hz 600 W 0.2 W (Standby) 3 W (CEC standby) 434 (W) x 171 (H) x 381 (D) mm (17-3/32" x 6-47/64" x 15") 10.8 kg (23 lbs 13 oz) R6/AA Type (two batteries) 53 (W) x 224 (H) x 28 (D) mm (2-3/32" x 8-13/16" x 1-7/64") 160 g (5.6 oz, including batteries) For purposes of improvement, specifications and design are subject to change without notice.