Denon AVR 989 Owners Manual - English - Page 35

Getting Started Connections Setup Playback Remote Control Multi-zone Information Troubleshooting Specifications s Level Rch Adjust the right channel output level. [Variable range] -12dB ~ 0dB ~ +12dB d Volume Level Adjust the main volume level. [Selectable items] VAR : Allow volume adjustment by remote control. -40dB : Fix the volume to -40 dB. 0dB : Fix the volume to 0 dB. "VAR" is fixed when a power amplifier is assigned to the ZONE2 output channel at menu "Manual Setup" - "Option Setup" - "Amp Assign" (vpage 32). f Volume Limit Make a setting for maximum volume. [Selectable items] OFF : Do not set a maximum volume. -20dB : Set the maximum volume to -20 dB. -10dB : Set the maximum volume to -10 dB. 0dB : Set the maximum volume to 0 dB. This can be set when "Volume Level" is set to "VAR". g Power On Level Define the volume setting that is active when the power is turned on. [Selectable items] Last : Use the memorized setting from the last session. - - - : Always use the muting on condition when power is turned on. [Variable range] -70dB ~ +18dB : Set the volume level when the power is turned on in units of 1 dB. This can be set when "Volume Level" is set to "VAR". h Mute Level Set the amount of attenuation when muting is on. [Selectable items] Full : The sound is cut off entirely. -40dB : The sound is attenuated by 40 dB. -20dB : The sound is attenuated by 20 dB. Option Setup Make various other settings. F Menu screen F 2.Manual Setup 1.Speaker Setup 2.HDMI Setup 3.Audio Setup 4.ZONE2 Setup 5.Option Setup 2-5.Option Setup 1.Amp Assign 2.Vol.Control 3.Source Delete 4.On-Screen Display 5.Quick Select Name 6.Trigger Out 7.Remote ID Setup 8.232C Port 9.Display 10.Setup Lock a Amp Assign Define how the amplifier for the surround back speaker channels is used. The places where the surround back amplifier are used can be set freely according to the usage environment. This makes it possible to output sound to rooms other than the room (the MAIN ZONE) where surround playback is performed (multi-zone playback) or play the sound with high quality using the front speakers (bi-amp connections). [Selectable items] 7.1ch ZONE2 FrontA Bi-Amp FrontB Bi-Amp : The surround back channel is output from the speakers connected to the SURR.BACK/AMP ASSIGN terminals. : When ZONE2 power is on, ZONE2 sound is emitted from the speaker connected to the SURR.BACK/AMP ASSIGN terminal. : The Front A channel for Bi-Amp use is output from the speakers connected to the SURR. BACK/AMP ASSIGN terminals. : The Front B channel for Bi-Amp use is output from the speakers connected to the SURR. BACK/AMP ASSIGN terminals. For details on how to select, set and cancel settings for each menu, see "Menu Operations" (vpage 20). 32