Denon AVR 989 Owners Manual - English - Page 64
Remote Control Unit Operations
UPC - 883795000642
View all Denon AVR 989 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Getting Started Connections Setup Playback Remote Control Multi-zone Information Troubleshooting Specifications Remote Control Unit Operations [Front] Operating DENON Audio Components 1 Set [SOURCE CONTROL 1] to "AUDIO". [SOURCE CONTROL 1] [SOURCE CONTROL 2] 2 Set [SOURCE CONTROL 2] to the position for the component to be operated (CD, iPod/NETWORK or TUNER). [Rear] 3 Operate the audio component. b For details, refer to the component's operating instructions. b While this remote control is compatible with a wide range of infrared controlled components, it may be the case that some component models cannot be operated with this remote control. [ZONE2 OFF] [NUMBER] [MAIN ON] Presetting • DENON and other makes of components can be operated by setting the preset memory. • Operation is not possible for some models. 1 Set [SOURCE CONTROL 1] to "AUDIO" or "VIDEO". b Set to the AUDIO side for the CD position, and to the VIDEO side for the DVD/HDP, VCR, SAT/CABLE or TV position. 2 Depending on the model and year of manufacture of your equipment, some buttons may not operate. Set [SOURCE CONTROL 2] to the component to be registered. • The signals for the pressed buttons are emitted while setting the preset memory. To avoid accidental operation, cover the remote control unit's transmitting window while setting the preset memory. • Depending on the model and year of manufacture, this function cannot be used for some models, even if they are of makes listed in the list of preset codes. • Some manufacturers use more than one type of remote control code. Refer to the included list of preset codes to change the number and verify correct operation. • The preset memory can be set for one component only among the following: DVD/HDP and SAT/CABLE. • VDP (Video Disc Player) can be preset when [SOURCE CONTROL 2] is set to "DVD/HDP". Operating Preset Components 1 Set [SOURCE CONTROL 1] to "AUDIO" or "VIDEO". b Set to the AUDIO side for the CD position, and to the VIDEO side for the DVD/HDP, VCR, SAT/CABLE or TV position. 2 Set [SOURCE CONTROL 2] to the component you want to operate. 3 Operate the component. b For details, refer to the component's operating instructions. b Some models cannot be operated with this remote control unit. 3 Press [ZONE2 OFF] and [MAIN ON] at the same time. The indicator starts flashing. 4 Press [NUMBER] and input the 3-digit number of the brand of the component to be preset. The numbers are shown in the Preset Code Table (vEnd of this manual). 5 To store the codes of another component in the memory, repeat steps 1 to 4. 61