Denon DHT FS3 Owners Manual - English - Page 11

Getting Started Installation Connections Settings Operation Other functions Optimum installation layout The DHT-FS3 can reproduce a realistic 5.1-channel surround sound for enhanced sense of presence using just the front speaker unit and the subwoofer. Ideal layout examples Connecting the front speaker unit and subwoofer Use the exclusive connection cable to connect. E ENGLISH Operating the remote control unit b To disconnect the plug, press down on the lock lever and pull. Lock lever NOTE: • Be sure to insert the connection cable's plug fully to the hilt. Incomplete connections will cause noise or operating problems. Installation tips Installing as shown below provides a better surround effect. • Listen from a distance of at least 1 meter from the front speaker unit. • Keep the front speaker unit away from the left and right walls. • When mounting in a TV rack, use with the door opens. NOTE: • Do not place any heavy objects (TV, etc.) on top of the DHT-FS3. Changing the speaker connection cable The included connection cable can be replaced, for example if you want a longer cable. q Pressing the release button on the opposite side from lock lever, pull the cable out of the plug. Lock lever e Pressing the release button, insert the cores into the plug, matching the cable's + and - polarities with the + and - sides on the plug. • The size of the room, the distance between the DHT-FS3 and the listening position, etc., can be set using the "ROOM" option in the "Detailed settings" (vpage 11). Release button w Peel off the sheathing from the tip of the new cable and twist tightly so that the tip is not frayed. Release button r Release the release button and gently pull on the cable to check that it is secure. 0.03 ft / 10 mm NOTE: • Speaker connection cables of up to 1.2 mm in thickness can be connected to the DHT-FS3's speaker terminal.  ENGLISH Troubleshooting Specifications