Denon DN-X1500S Operating Instructions - Page 11

ENGLISH 7 EFFECTOR Select the source of Effector 1 • Turn the ASSIGN switch !1 in the EFFECTS part to select the desired source. Set BPM (See page 6.) • Using the TAP button !5 and the MODE PARAMETERS knob !2, the BPM can be set with either the AUTO BPM , TAP or MANUAL input. 2 [About BPM] • When using the auto BPM function, perform the lock operation. When the BPM changes, the effect sound changes. • When the auto BPM cannot be measured, use the TAP button and input the BPM. • If you know the selection's BPM, we recommend inputting it in the manual mode. Select Effector mode (First selection) Echo2, Filter2, Pan, Trans and Key% are set in the preset mode. • Turn the MODE PARAMETERS knob !2 to select prefer effect mode. • The effect mode changes and is displayed on display by one click. 3 None Delay Echo 1 (Echo 2) Flanger (Filter 2) Filter 1 (Pan) (Trans) (Key %) • After select prefer effect then push MODE PARAMETERS knob !2 to complete the first selection and go to the second selection. Beat effect and manual effect mode (Second selection for Delay, Echo1, Echo2, Pan, Trans, Filter2 and Flanger) Manual effect mode is set in the preset mode. The default is "Manual OFF". In this case, skip to third selection (step 5). 4 • All effect modes excluded Key and Filter1 work with beat mode or manual mode. You can choose beat or manual with MODE PARAMETERS knob !2. • After select prefer mode then push MODE PARAMETERS knob !2 to complete the second selection and go to the third selection. Time select (Third selection for Delay, Echo1, Echo2, Pan, Trans, Filter2 and Flanger) • Beat mode: Time parameter of effect is determined based on countered BPM. BPM is countered automatically in AUTO BPM mode or manually inputted in MANUAL mode or tapped in TAP mode. 5 Using the MODE PARAMETERS knob !2, you can select time parameter. Selected time parameter is used soon. • Manual mode: Time parameter of effect is inputted with MODE PARAMETERS knob !2. Selected time parameter is used soon. • After select prefer parameter then push MODE PARAMETERS knob !2 to return to the first selection. Key% select (Second selection for Key%) • Key is selected with MODE PARAMETERS 6 knob !2. Selected Key is used soon. • After select prefer parameter then push MODE PARAMETERS knob !2 to return to the first selection. WET/DRY control • DN-X1500S can adjust the mixing ratio of source sound and effected sound using 7 WET/DRY control !3. • When turn to WET position Effector sound is only outputted. Otherwise at DRY position only source sound is outputted. Effector On/Off 8 • Pushing ON/OFF button !4 to turn on and off the Effector. When the Effector on, this button lights. Effector Cue • When the EFFECTS CUE button !6 is 9 pressed, you can check the effected sound by headphone. • The sound is unaffected by the EFFECTS ON/OFF button !4. First selection Delay Second selection Beat Effect mode Manual input mode Third selection Delay time is selectable 1/4, 1/2, 3/4, 1/1, 2/1, 4/1, 8/1 of BPM. Delay time can be set 1 to 3500 msec. Echo 1 (Loop Echo) • When the WET/DRY control is turned clockwise, the Echo sound is looped. Beat Effect mode Manual input mode Echo time is selectable 1/4, 1/2, 3/4, 1/1, 2/1, 4/1, 8/1 of BPM. Echo time can be set 1 to 3500 msec. Echo 2 (Normal Echo) Preset functions Beat Effect mode Manual input mode Filter 1 (Manual Filter) • When the WET/DRY control is turned, the Filter frequency is moved. Filter type is selectable LowP.F. (Low-pass filter), MidP.F. (Band-pass filter), Hi P.F. (High-pass filter) Filter 2 (Auto Filter) Preset functions Beat Effect mode Manual input mode Echo time is selectable 1/4, 1/2, 3/4, 1/1, 2/1, 4/1, 8/1 of BPM. Echo time can be set 1 to 3500 msec. - Filter time is selectable 1/2, 1, 2, 4, 8, 16, 32 of BPM. Filter time can be set 10 to 16000 msec. Flanger Beat Effect mode Manual input mode Flanger time is selectable 1/2, 1, 2, 4, 8, 16, 32 of BPM. Flanger time can be set 10 to 16000 msec. Pan Preset functions Beat Effect mode Manual input mode Panning time is selectable 1/4, 1/2, 3/4, 1/1, 2/1, 4/1, 8/1 of BPM. Panning time can be set 10 to 16000 msec. Trans Preset functions Key % Preset functions Beat Effect mode Trans time is selectable 1/4, 1/2, 3/4, 1/1, 2/1, 4/1, 8/1 of BPM. Manual input mode Trans time can be set 10 to 16000 msec. Key% is selectable -100 % to +100 %. - 11