Denon DRA-697CIHD Owners Manual - English - Page 13
Connecting the power supply cord, Connecting the AUDIO PRE OUT/MAIN IN terminals, Connecting
UPC - 081757507615
View all Denon DRA-697CIHD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Connections Connecting the TRIGGER OUT jacks Turn the DC 12 V voltage on and off for the individual functions. Connecting the AUDIO PRE OUT/MAIN IN terminals A L R A L R ENGLISH Connections Premain amplifier or Power amplifier (MAIN) L L IN R R L L OUT R R Connecting the RS-232C terminal This terminal is used for an external controller. Perform the following operation before using an external controller connected to the RS-232C terminal: 1. Press the ON/STANDBY button on the main unit and set the unit to the operating mode. 2. Perform the operation to turn off the power from the external control. 3. Check that the product has been set to the standby mode. After checking the above, check the connections of the external controller. Operation is possible. Connecting the power supply cord Power supply cord (Supplied) AC outlet (wall) AC 120 V, 60 Hz AC OUTLETS • SWITCHED (total capacity - 120 W (1 A)) The power to the outlet is turned on and off in conjunction with the POWER switch on the main unit, and when the power is switched between on and standby from the remote control unit. No power is supplied from this outlet when this unit's power is at standby. Never connect equipment whose total power consumption exceeds 120 W (1 A). NOTE: • Insert the plugs securely. Incomplete connections will result in the generation of noise. • Only use the AC OUTLETS for audio equipment. Never use it for hair driers, monitors or other electrical appliances. 10 ENGLISH