Denon DVD-1730 Owners Manual - English - Page 15
Still / Pause, Basic Playback, Disc Menus, General Features, Title Menu, Brightness of the Front
View all Denon DVD-1730 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
DISC PLAYBACK English Basic Playback Brightness of the Front Panel Display DVD CD MP3 JPEG WMA Getting started • Turn on the power of the TV, amplifier and any other components which are connected to the DVD player. • Make sure the TV and audio receiver (commercially available) are set to the correct channel. 1 Press the POWER ON button. • "P-ON" will appear briefly on the display panel. 2 Press the OPEN/CLOSE button to open disc loading tray. 3 Place the disc in the tray, with the label facing up. 4 Press the PLAY button. • The tray will close automatically, then playback will start from the first chapter or track of the disc. If the playback does not start automatically, press the PLAY button. • When you play back the DVD with a title menu, it may appear on the screen. In this case, refer to "Title Menu". 5 Press the STOP button to stop playback. NOTES: • A "prohibited icon" may appear at the top-right corner on the TV screen during operation, warning that a prohibited operation has been encountered by the DVD player or the disc. • With DVDs that use some titles for playback program signals, playback may start from the second title, or it may skip these titles. • During the playback of two layered disc, pictures may stop for a moment. This happens when the 1st layer switches to the 2nd layer. This is not a malfunction. • The operation may vary when you play back DVDs with disc menu. Refer to the manual accompanying the disc for details. HDMI Setup 1 Press the DIMMER button on the front panel to select the desired brightness of the front panel display. (BRIGHT, DIMMER or OFF) • The default setting is BRIGHT. NOTES: • The brightness of the front panel display can be adjusted from the setup menu. Details are on page 25. • When you turn on the power next time, the brightness of the front panel display will be as set in setup menu. General Features DVD DVD may contain menus to navigate the disc and access special features. Press the appropriate Numeric buttons or use the Cursor buttons (K / L / s / B) to highlight your selection in the DVD main menu and press the ENTER button to confirm. NOTE: • Unless otherwise stated, all operations described in this manual are based on remote control use. Some operations can be carried out using the menu bar on the TV screen. Disc Menus DVD 1 Press the MENU button. • The DVD main menu will appear. 2 If the feature is not available, symbol may appear on the TV screen. 3 If disc menu is available on the disc, audio lan- guage, subtitle options, chapters for the title and other options will appear for selection. 4 Press the Cursor buttons (K / L / s / B) to select an item, and the ENTER button to confirm the selection. 1 Press the HDMI button on the front panel to select the HDMI output mode. The output mode changes as follows every time the HDMI button is pressed. • The HDMI indicator on the front panel lights up when HDMI output mode is on. 480P 720P 1080 OFF Title Menu DVD 1 Press the TOP MENU button. • The title menu will appear. 2 If the feature is not available, symbol may appear on the TV screen. 3 Press the Cursor buttons (K / L / s / B) to select an item, and the ENTER button to confirm the selection. • Playback will begin at the selected title. 480P (Default): Video output from the HDMI OUT jack at 480p. CALLING UP A MENU SCREEN DURING PLAYBACK 720P : Video output from the HDMI OUT jack at 720p. 1080 : Video output from the HDMI OUT jack at 1080i. OFF : No video output from the HDMI OUT connector. NOTES: • Video and audio signals may distorted temporarily DVD • Press the MENU button to call up the DVD main menu. • Press the TOP MENU button to call up the title menu. NOTE: when switching to/from the HDMI output mode. • Contents of menus and corresponding menu opera- • Use a display equipment with an HDMI-compatible port. tions may vary among discs. Refer to the manual • The unit is sending Progressive video signal and HDMI accompanying the disc for details. signal simultaneously when HDMI mode is set to ON. If you connected component video cable to your TV, which Still / Pause is not compatible with progressive scan, the distorted pic- ture will be output. DVD CD MP3 JPEG WMA • The HDMI indicator on the front panel flashes when you select the HDMI output mode but there is no HDMI cable. 1 During playback, press the • You can check the HDMI connection status by pressing STILL/PAUSE button. F the DISPLAY button during playback with the HDMI • Playback will pause and sound output mode (refer to page 20). • If the TV is not compatible with newly selected HDMI output mode, the actual output mode will be kept the one before changing the selection. When this occurs, the newly selected mode will appear on the front panel display (see page 10) while the actual output resolution will be indicated by performing the on-screen display as will be muted. 2 To continue playback, press the PLAY button. NOTE: • On DVDs, set "STILL MODE" to "FIELD" on the display menu if pictures in the pause mode are blurred (refer to page 23). described on page 20. • You cannot select the HDMI output mode when the setup menu is on the TV screen. - 15 - EN