Denon DVD 2930CI Owners Manual - English - Page 32

ENGLISH Other settings HDMI FORMAT Making the settings for the picture output from the HDMI terminal Changing the signal format Changing the resolution Other settings ¢ When the signal format is set to "YCbCr" or "RGB" HDMI SELECT HDMI SELECT HDMI FORMAT [D H F G] [PICTURE ADJUST] [ENTER] About the button names in this explanation < > : Buttons on the main unit [ ] : Buttons on the remote control unit Button name only : Buttons on the main unit and remote control unit Press HDMI SELECT and select the setting mode. • The mode is indicated on the display. HDMI OFF (Upon purchase): No video or audio signals are output from the HDMI terminal. YCbCr: Component format video signals and audio signals are output from the HDMI terminal. RGB: RGB format video signals and audio signals are output from the HDMI terminal. PC RES.: RGB format video signals with a resolution for use on computers and audio signals are output from the HDMI terminal. The output is set to 60 Hz, regardless of whether the disc being played in NTSC or PAL. Set to "YCbCr" or "RGB" if the TV or monitor connected to the HDMI terminal is not compatible with computer resolutions. Press HDMI FORMAT and select the mode. • The mode is indicated on the display. AUTO: The performance of the HDMI device connected to the HDMI terminal is detected automatically and the resolution for its panel's pixel number or the maximum resolution that can be input is output. The output resolution is set at "HDMI AUTO FORMAT" under "digital interface setting" ( page 19). 480/576i, 480/576P (Upon purchase), 720P, 1080i, 1080P: The video signal from the HDMI terminal is converted to the selected resolution for output. The video output when "480/576i" is selected is 480i for NTSC, 576i for PAL. The video output when "480/576P" is selected is 480P for NTSC, 576P for PAL. • The resolution is the same for "YCbCr" and "RGB". • The picture may be disturbed even if the TV or monitor connected to the HDMI terminal is compatible with computer resolutions. • When outputting video signals from the HDMI terminal, the video signals output from the component video terminals are interlaced. ¢ When the signal format is set to "PC RES.": Press HDMI FORMAT and select the mode. • Select the video resolution output from the HDMI terminal. • The mode is indicated on the display. VGA (Upon purchase): The signal is converted to a resolution of 640 x 480 (60 Hz). XGA: The signal is converted to a resolution of 1024 x 768 (60 Hz). WXGA: The signal is converted to a resolution of 1280 x 768 (60 Hz). SXGA: The signal is converted to a resolution of 1280 x 1024 (60 Hz). 29 ENGLISH