Denon DVD-3800 Owners Manual - Page 18
METERS, NORMAL Factory default, To exit the setup mode - nks
View all Denon DVD-3800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
ENGLISH B When "DELAY TIME" is selected With 5.1-channel surround sound, ideally the distance between the listening position and all the speakers aside from the subwoofer should be the same. The delay time setting can be used to make the sound from the different speakers reach the listening position at the same time. Use the • and ª cursor buttons to select the setting item, then press the ENTER button. • When "DISTANCE" is selected: METERS (when the 0 cursor button is pressed): The unit of distance is set to meters ("m"). FEET (when the 1 cursor button is pressed): The unit of distance is set to feet ("ft"). • When "FRONT Lch", "FRONT Rch", "CENTER", "SURROUND Lch", "SURROUND Rch", "SUBWOOFER" is selected: 3 Use the 0 and 1 cursor buttons to set the distance from the listening position to the different speakers. ✽ The distance can be set within the range of 0 to 60 feet (18 meters). ✽ The maximum difference in speaker distance for which adjustment is possible is 15 feet (4.5 meters). • When "DEFAULT" is selected: When "DEFAULT" is selected and the ENTER button is pressed, all the items are restored to their factory default settings. ✽ When digital connections are made with an AV amplifier, make the speaker settings on the AV amplifier. For DVD audio discs, the disc's settings are given priority, so the sound may not be produced as set with the above speaker mode setting. ✽ Press the RETURN button to return to the "SPEAKER SETUP" menu. ENTER Remote control unit Remote control unit SP EAKE R SE TUP B DE L AY T I ME SELECT : D I STANC E ME T ERS F RONT L c h 3 . 6m F RONT R c h 3 . 6m CENT ER 3 . 6m SURROUND L c h 3 . 0m SURROUND R c h 3 . 0m SUBWOOF ER 3 . 6m DE F AUL T ON DEC I S I ON : ENTER BUT TON ENTER Remote control unit SP EAKE R SE TUP B DE L AY T I ME SELECT : D I STANC E ME T ERS F RONT L c h 3 . 6m F RONT R c h 3 . 6m CENT ER 3 . 6m SURROUND L c h 3 . 0m SURROUND R c h 3 . 0m SUBWOOF ER 3 . 6m DE F AUL T ON DEC I S I ON : ENTER BUT TON SP EAKE R SE TUP B DE L AY T I ME SELECT : D I STANC E ME T ERS F RONT L c h 3 . 6m F RONT R c h 3 . 6m CENT ER 3 . 6m SURROUND L c h 3 . 0m SURROUND R c h 3 . 0m SUBWOOF ER 3 . 6m DE F AUL T ON DEC I S I ON : ENTER BUT TON 18 w When "DIGITAL OUT" is selected: NORMAL (Factory default) When playing DVDs recorded in Dolby Digital or DTS, bitstream signals are output from the digital audio output terminals. When playing DVDs recorded in linear PCM or packed PCM, linear PCM signals are output. Select "NORMAL" when making digital connections to an AV amplifier with built-in Dolby Digital and DTS decoder. PCM When playing Dolby Digital/DTS bitstream signals or DVDs recorded in linear PCM or packed PCM, the signals are converted into 48 kHz/16-bit PCM (2-channel) signals and output from the digital outputs. When playing DVDs recorded in PCM, linear PCM signals are output. ENTER Remote control unit Remote control unit AUD I O SE TUP AUD I O CHANNE L D I G I TAL OUT L PCM (4 4 .1 kHz / 4 8 kH z ) BASS ENHANCE R(2 CHANNEL) DENON L I NK E X I T SE TUP B NORMAL PCM SEL ECT : DE C I S I ON : ENT E R BUT TON e When "LPCM (44.1 kHz / 48 kHz)" is selected: OFF (Factory default) When playing linear PCM or packed PCM DVDs that are not copyright-protected, for 2-channel PCM audio signals up to 96 kHz, linear PCM signals are output as such without being converted from the digital outputs. (176.2 kHz and 192 kHz signals are converted to 88.2 kHz and 96 kHz, respectively.) PCM signals of 48 kHz/16 bits and lower are output, regardless 3 of whether they are copyright-protected or not. For DVDs containing multi-channel PCM signals, the digital signals are down-mixed for output into two channels, front left and right. (Only the front left and right channels are output for sources for which down-mixing is prohibited.) When playing copyright-protected linear PCM or packed PCM DVDs, in consideration of copyrights, no digital signals are output for sources exceeding 48 kHz/16 bits. When playing such sources, either set to "ON" or make analog connections. (See page 9.) ON Linear PCM and packed PCM signals are converted to 44.1 kHz or 48 kHz and output. (The PCM digital audio output signals are converted to 48 kHz or less in consideration of copyrights.) When making digital connections to an AV amplifier that is not compatible with 96 kHz/88.2 kHz signals, set to "ON". When playing DVDs recorded in linear PCM or packed PCM and the unit is set to output digital and analog audio signals simultaneously, the analog audio output signals are also converted to 48 kHz or below, so we recommend setting to "OFF" and also making analog connections. r When "BASS ENHANCER (2 CHANNEL)" is selected: OFF (Factory default) No sound is produced from the subwoofer. ON Sound is produced from the subwoofer. In this case, set the subwoofer to "YES" at the speaker settings. AUD I O SE TUP AUD I O CHANNE L D I G I TAL OUT L PCM (4 4 .1 kHz / 4 8 kH z ) BASS ENHANCE R(2 CHANNEL) DENON L I NK E X I T SE TUP B OF F ON SEL ECT : DE C I S I ON : ENT E R BUT TON AUD I O SE TUP AUD I O CHANNE L D I G I TAL OUT L PCM (4 4 .1 kHz / 4 8 kH z ) BASS ENHANCE R(2 CHANNEL) DENON L I NK E X I T SE TUP B OF F ON SEL ECT : DE C I S I ON : ENT E R BUT TON ✽ To exit the setup mode Use the ª cursor button to select "EXIT SETUP", then press the ENTER button. It is also possible to quit by pressing the SETUP button on the remote control unit.