Denon DVM-4800 Owners Manual - Page 15
Connecting to a Digital Recorder MD Recorder, DAT Deck, etc., Connecting to a Stereo Component
View all Denon DVM-4800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
ENGLISH (5) Connecting to a Digital Recorder (MD Recorder, DAT Deck, etc.) TV VIDEO IN Set the "Audio" default setting as shown below. (See page 51.) • "PCM Down conversion: "NO" / "YES" • "Dolby Digital": "Bitstream" / "PCM" • "DTS Digital Surround": "PCM" Playing DVDs with incorrect settings may result noise that could damage your ears or speakers. DVM-4800 (6) Connecting to a Stereo Component TV VIDEO IN B 8 9 Digital audio input connector (OPTICAL) Digital audio input connector (COAXIAL) DVM-4800 Stereo component NOTE: • Use commercially available 75 Ω/ohm pin-plug cord to connect the DVM-4800's video out connector to the TV or monitor. 15
ENGLISH
15
(5)
Connecting to a Digital Recorder (MD Recorder, DAT Deck, etc.)
VIDEO IN
B
Set the “Audio” default setting as shown below.
(See page
51
.)
•
“PCM Down conversion: “NO”
/
“YES”
•
“Dolby Digital”: “Bitstream”
/
“PCM”
•
“DTS Digital Surround”: “PCM”
Playing DVDs with incorrect settings may result noise that could
damage your ears or speakers.
DVM-4800
TV
Digital audio input
connector (OPTICAL)
Digital audio input
connector (COAXIAL)
VIDEO IN
(6)
Connecting to a Stereo Component
DVM-4800
TV
Stereo component
NOTE:
•
Use commercially available 75
Ω
/ohm pin-plug cord to connect the DVM-4800‘s video out connector to the TV or monitor.