Denon DVM-4800 Owners Manual - Page 57
Troubleshooting - reset
View all Denon DVM-4800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
ENGLISH 17 TROUBLESHOOTING Check again before assuming the player is malfunctioning. 2 Are all the connections correct? 2 Are you following the instructions in the manual? 2 Are the amplifier and speakers operating properly? If the DVM-4800 does not seem to be functioning properly, check the table below. If this does not solve the problem, the DVM-4800 may be damaged. Turn off the power, unplug the power cord from the power outlet and contact your store of purchase or nearest DENON sales office. Symptom Check Power does not turn on. • Plug the power cord securely into the power outlet. Playback does not start when PLAY button is pressed. Playback stops immediately. • Is there condensation on the disc or player? (Let stand for 1 or 2 hours.) • Discs other than DVDs, video CDs and music CDs cannot be played. • Disc is dirty. Wipe off the dirt. Picture does not appear. Sound is not produced or sound quality is poor. Menu playback of video CD's is not possible. • Check the connections. • Set the TV's input to "video". • Check the connections. • Properly set the input of the TV, stereo, etc. • Menu playback is not possible with anything but video CDs with playback control. Picture is disturbed during the search • Some disturbance is normal. operation. Buttons do not operate. • Some operations are disabled for some discs. No subtitles are displayed. Audio (or subtitle) language does not switch. Angle does not switch. • Subtitles are not displayed for DVDs not containing subtitles. • Subtitles are turned off. Turn the subtitles setting on. • The audio (or subtitle) language does not switch for discs which do not include multiple audio (or subtitle) languages. • For some discs the audio (or subtitle) language cannot be switched when the operation to switch it is performed, but can be switched on the menu screens. • The angle cannot be switched for DVDs which do not contain multiple angles. In some cases multiple angles are only recorded for specific scenes. Playback does not start when the title is • Check the "Ratings" setting. selected. You have forgotten the password you have set for the "Ratings" setting. • Use the procedure described below to reset all the settings to the factory defaults. In the stop mode, press and hold in the PLAY, SKIP (8) and OPEN/CLOSE buttons on the DVD player for at least 3 seconds. (Check that "Initialized" has turned off from the TV screen.) The disc is not played with the audio or • The disc does not play with the selected audio or subtitle language if that audio or subtitle language subtitle language set as the default setting. is not included on that DVD. Picture is not displayed in 4:3 (or 16:9). • Set the "TV Aspect" default setting to the proper setting for the connected TV. No messages appear on the screen when • Set the "On-Screen Messages" default setting to "On". buttons are operated. Menu screen messages for the desired • Check the default setting for the disc language's menu language. language do not display. Remote control unit does not operate. • Check that the batteries are inserted in the proper "" directions. • The batteries are dead. Replace them with new batteries. • Point the remote control unit at the remote control sensor when operating it. • Operate the remote control unit within a distance of 7 meters from the remote control sensor. • Remove the obstacle between the remote control unit and remote control sensor. Page 10 - 8 9 10 - 10 - 22 - 23 - 41 - 39, 41 42 47, 48 - 47 00 00 47 17 17 17 17 17 57