Denon RCD-N7 Instruction Manual - Page 52

ENGLISH Symptom The TV sound is not output. "No Network Connection" is displayed. Cause Countermeasure • Other digital audio signals than • When you try to input digital 2 channel linear PCM cannot audio signals other than 2 be input through AUX IN 3 channel linear PCM to this unit, (OPTICAL) terminal of this unit. set the digital audio output setting of the TV to 2 channel PCM. For details, see the operating instructions of the TV. • The network is not properly set • Perform "Network First Setup." up. • Select a source other than the network function. GRemote controlH Symptom Cause Countermeasure Set does not • Batteries are worn. • Replace with new batteries. work properly • You are operating outside of the • Operate within the specified when remote specified range. range. control operated. • Obstacle between main unit and • Remove the obstacle. remote control. • The batteries are not inserted • Insert the batteries in the in the proper direction, as proper direction, following the indicated by the polarity marks polarity marks in the battery in the battery compartment. compartment. • The set's remote control sensor • Move the set to a place in which is exposed to strong light (direct the remote control sensor will sunlight, fluorescent light, etc.). not be exposed to strong light. Page - 27 12 Page 4 4 - 4 4 GCDH Symptom Cause "Unsupported" • The disc is not properly loaded. is shown on the display even though a CD is loaded. Disc does not • The disc is dirty or scratched. play when 1/3 button is pressed. Countermeasure • Reload the disc. • Wipe the disc clean or replace the disc. A specific part of a disc is not played. • The disc is dirty or scratched. • Wipe the disc clean or replace the disc. A CD-R or CD-RW • The disc has not been finalized. • Finalize the disc then play it. disc cannot be • The recording conditions are bad • Use a properly recorded disc. played. or the quality of the disc itself it poor. MP3 and WMA • The file formats, extensions or • Create discs with file formats, files cannot be settings made when the disc extensions or settings played. was created are not compatible compatible with this unit. with this unit. GTunerH Symptom Continuous noise is heard when receiving FM programs. Hissing or continuous noise is heard when receiving AM programs. Cause • Antenna cable is not properly connected. • This may be noise from a TV or interference from a broadcast station. Countermeasure • Connect the antenna cable properly. • Connect an outdoor antenna. • Turn off the TV. • Change the position and direction of the AM loop antenna. Page 3 3 3 3 - 43 Page 7 - - 7 48