Denon SC-CX303 Owners Manual - English - Page 4

ENGLISH Getting Started Contents Getting Started Accessories 1 Before using Cautions on installation 1 External finish 1 Moving the unit 1 Cleaning 1 Other cautions 2 Connections Normal connections 2 Bi-wiring connections 3 Removing the Speaker Net 4 About the Ventilation Holes 4 Specifications 4 Accessories Check that the following parts are attached in addition to the main unit: q Operating instructions 1 w Service station list 1 e Connection Cord (Approx. 3 m 2 r Foam plug 2 t Anti-slip pads (8 pcs. / 1sheet 1 y Banana plugs 4 e r Before using Cautions on installation The quality of the sound produced from the speaker system is affected by the size and type of the room, as well as by the method of installation. Consider the points listed below before installing the speaker system. • If the bass sound is overemphasized when the speaker systems are installed directly on the floor, set them on concrete blocks or other hard stands. • Placing the speakers on a shelf or in a corner can boost the bass level of the speaker. If you want to reduce it, please place the foam plugs in the reflex port tubes that you can find on the back of the speakers. • Do not insert the foam plug too deep. The foam plug could fall in and get stuck inside. • If the foam plug cannot be removed or falls inside, stop using the unit immediately and consult your store of purchase or your nearest repair and inquiry center. • Note that placing the speaker system on the same stand or shelf as a record player may result in howling. • Also note that if there is a magnet or any device generating magnetic force nearby, interaction between this device and the speaker systems can cause the colors on the TV to become blotchy. • For increased safety, when installing the unit, attach four of the included anti-slip pads to the bottom of the unit as shown on the diagram below. [Bottom view] Attach the anti-slip pads here WARNING: • Fasten the connection cords to the wall, etc., to avoid catching them on your hands or feet and causing the unit to fall. External finish The surface of the set's cabinet uses parts made from natural wood. The colors and patterns are thus natural and unique to each set. Note that the surface is coated and finished based on DENON's strict quality standards so the set can be used without worry. Moving the unit • Do not shock this unit. • Always check that the connection cords disconnected before moving this unit. Cleaning • Use a wiping cloth and wipe lightly to remove dirt from the cabinet and operation panel. • When using chemically treated cloths, follow the precautions that have been written for them. • Do not use benzene, thinners, or other organic solvents or insecticides on the main unit since they may cause a change in quality or color. t y 1 ENGLISH