Dewalt DCBL722B Instruction Manual - Page 10

English Intended Use This cordless handheld blower is designed for professional blowing applications. DO NOT use under wet conditions or in presence of flammable liquids or gases. DO NOT let children come into contact with the tool. Supervision is required when inexperienced operators use this tool. ASSEMBLY AND ADJUSTMENTS WARNING: To reduce the risk of serious personal injury, turn unit off and remove the battery pack before making any adjustments or removing/installing attachments or accessories. An accidental start-up can cause injury. Blow Tube Assembly (Fig. D) WARNING: Do not operate blower without tube securely in place. Never reach down into housing through tube hole. WARNING: Always remove the battery when you leave blower unattended or when storing, checking, adjusting, cleaning, or working on blower. 1. To attach the blower tube 4 to the power head, align the peg 8 of the power head with the notch 9 of the blower tube opening as shown in Fig. D. 2. Push the blower tube onto the power head until the tube locks engage the blower tube and an audible click is heard. 3. Pull on the tube to ensure it is securely in place. 4. To remove the tube, insert a screwdriver into the unlocking hole 10 on the side of the blower tube. Depress the tab inside and pull tube off. Fig. D 4 8 9 10 Concentrator Assembly (Fig. E) Use the concentrator 7 attachment to target air flow to a tighter area. 1. Align the concentrator 7 with the tube assembly as shown in Fig. E. 2. Slide the concentrator 7 onto the tube 4 . 3. Push down until the tabs 11 on both sides of the tube engage the locking holes 12 in both sides of the concentrator 7 . 4. Pull on the concentrator 7 to ensure it is securely in place. 5. To remove the concentrator 7 , depress the tabs 11 and pull the concentrator 7 away from the tube. Fig. E 7 12 11 OPERATION WARNING: To reduce the risk of serious personal injury, turn unit off and remove the battery pack before making any adjustments or removing/installing attachments or accessories. An accidental start-up can cause injury. WARNING: Do not operate blower without blow tube securely in place. Never reach down into housing through tube hole. WARNING: Always wear safety glasses. Wear a filter mask if the operation is dusty. Use of rubber gloves and substantial footwear is recommended when working outdoors. Keep long hair and loose clothing away from openings and moving parts. FOR HOUSEHOLD USE ONLY. WARNING: Cut Hazard. When turning the tool off, wait 10 seconds for the fan to stop rotating before removing the blower tube. • Always ensure the blower is switched OFF and the battery is removed when: -- You leave blower unattended. -- Clearing a blockage. -- Checking, adjusting, cleaning or working on blower. • Only use blower in daylight or good artificial light. 8