Dewalt DCBL722B Instruction Manual - Page 11

Installing and Removing the Battery Pack, Fig. F, Switching ON/OFF Fig. A, H, Proper Hand Position - blower

Get Dewalt DCBL722B PDF manuals and user guides View all Dewalt DCBL722B manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

Installing and Removing the Battery Pack (Fig. F) WARNING: Before removing or installing battery, make certain the speed lock lever 2 is in the off position to prevent switch actuation. NOTE: For best results, make sure your battery pack is fully charged. To install the battery pack 6 into the tool handle, align the battery pack with the rails inside the tool's handle and slide it into the handle until the battery pack is firmly seated in the tool and ensure that it does not disengage. To remove the battery pack from the tool, press the release button 5 and firmly pull the battery pack out of the tool handle. Insert it into the charger as described in the charger section of this manual. Fig. F 6 English Switching ON/OFF (Fig. A, H) WARNING: Use both hands to grip the product firmly when switching on. CAUTION: Do not point unit discharge at self or bystanders. • To turn the blower ON, ensure the speed lock lever 2 is in the off position and depress the trigger switch 1 . • To lock the blower ON, push the speed lock lever 2 forward, as shown in Fig. H. The blower runs at higher speeds as the lever is moved further. The speed lock lever can also be pushed forward to start the blower without needing to first depress the trigger switch. • To turn the blower OFF, release the trigger switch 1 and or pull back on the speed lock lever and return it to its off position. Fig. H 2 5 Proper Hand Position (Fig. G) WARNING: To reduce the risk of serious personal injury, ALWAYS use proper hand position as shown. WARNING: To reduce the risk of serious personal injury, ALWAYS hold securely in anticipation of a sudden reaction. Proper hand position requires one hand on the main handle 3 . Fig. G 3 Use (Fig. I) CAUTION: Do not point unit discharge at self or bystanders. CAUTION: Always wear safety glasses and hearing protection. Wear a filter mask if the operation is dusty. Use of gloves, long pants and substantial footwear is recommended. Keep long hair and loose clothing away from openings and moving parts. • Install the battery pack 6 into the battery housing. • Hold the blow tube approximately 7 inches (180 mm) above the ground, turn the blower ON and using a sweeping motion from side to side, advance slowly keeping the accumulated debris/leaves in front of you as shown in Fig. I. Fig. I 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
9
ENGLISH
Installing and Removing the Battery Pack
(Fig. F)
±
WARNING:
Before removing or installing
battery, make certain the speed lock lever
2
is in the
off position to prevent switch actuation.
NOTE:
For best results, make sure your battery pack is
fully charged.
To install the battery pack
 6 
into the tool handle, align the
battery pack with the rails inside the tool’s handle and slide
it into the handle until the battery pack is firmly seated in
the tool and ensure that it does not disengage.
To remove the battery pack from the tool, press the release
button
 5 
and firmly pull the battery pack out of the tool
handle. Insert it into the charger as described in the charger
section of this manual.
Fig. F
5
6
Switching ON/OFF (Fig. A, H)
±
WARNING:
Use both hands to grip the
product firmly when switching on.
±
CAUTION:
Do not point unit discharge at
self or bystanders.
•
To turn the blower ON, ensure the speed lock lever
 2 
is
in the off position and depress the trigger switch
 1 
.
•
To lock the blower ON, push the speed lock lever
 2 
forward, as shown in Fig.  H. The blower runs at higher
speeds as the lever is moved further. The speed lock
lever can also be pushed forward to start the blower
without needing to first depress the trigger switch.
•
To turn the blower OFF, release the trigger switch
 1 
and
or pull back on the speed lock lever and return it to its
off position.
Fig. H
2
Proper Hand Position (Fig. G)
±
WARNING:
To reduce the risk of serious
personal injury,
ALWAYS
use proper hand position
as shown.
±
WARNING:
To reduce the risk of serious
personal injury,
ALWAYS
hold securely in anticipation of
a sudden reaction.
Proper hand position requires one hand
on the main
handle 
3
.
Fig. G
3
Use (Fig. I)
±
CAUTION:
Do not point unit discharge at
self or bystanders.
±
CAUTION:
Always wear safety glasses and
hearing protection. Wear a filter mask if the operation
is dusty. Use of gloves, long pants and substantial
footwear is recommended. Keep long hair and loose
clothing away from openings and moving parts.
•
Install the battery pack
 6 
into the battery housing.
•
Hold the blow tube approximately 7 inches (180 mm)
above the ground, turn the blower ON and using a
sweeping motion from side to side, advance slowly
keeping the accumulated debris/leaves in front of you
as shown in Fig. I.
Fig. I