Dewalt DCN650B Instruction Manual - Page 11
Storage Recommendations, COMPONENTS FIG. A, ASSEMBLY AND ADJUSTMENTS, Belt Hook Fig. D, OPERATION - home depot
View all Dewalt DCN650B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
also charge a partially used pack whenever you desire with no adverse effect on the battery pack. 5. Foreign materials of a conductive nature such as, but not limited to, grinding dust, metal chips, steel wool, aluminum foil, or any buildup of metallic particles should be kept away from charger cavities. Always unplug the charger from the power supply when there is no battery pack in the cavity. Unplug the charger before attempting to clean. 6. Do not freeze or immerse the charger in water or any other liquid. Storage Recommendations 1. The best storage place is one that is cool and dry, away from direct sunlight and excess heat or cold. 2. For long storage, it is recommended to store a fully charged battery pack in a cool dry place out of the charger for optimal results. NOTE: Battery packs should not be stored completely depleted of charge. The battery pack will need to be recharged before use. SAVE THESE INSTRUCTIONS FOR FUTURE USE COMPONENTS (FIG. A) WARNING: Never modify the power tool or any part of it. Damage or personal injury could result. Refer to Figure A at the beginning of this manual for a complete list of components. Intended Use The DCN650 Cordless Finish Nailer has been designed for driving nails into wooden workpieces. DO NOT use under wet conditions or in presence of flammable liquids or gases. This cordless finishing nailer is a professional power tool. DO NOT let children come into contact with the tool. Supervision is required when inexperienced operators use this tool. WARNING: Lock the trigger lock-off in the locked position, disconnect battery pack from tool and remove nail strips from magazine before making adjustments or personal injury may result. Refer to Figure A at the beginning of this manual for a complete list of components. ASSEMBLY AND ADJUSTMENTS WARNING: To reduce the risk of serious personal injury, turn unit off and remove the battery pack before making any adjustments or removing/ installing attachments or accessories. An accidental start-up can cause injury. Belt Hook (Fig. D) WARNING: Remove nails from magazine before making any adjustments or servicing this tool. Failure to do so may result in serious injury. English WARNING: Disconnect battery pack from tool before making any adjustments, changing accessories, servicing, or moving the tool. Such preventative safety measures reduce the risk of starting the tool accidentally. CAUTION: When not in use, place tool on its side on a stable surface where it will not cause a tripping or falling hazard. Some tools with large battery packs will stand upright on the battery pack but may be easily knocked over. The DeWALT cordless nailers include an integrated belt hook 10 and can be attached to either side of the tool to accommodate left- or right-handed users. If the hook is not desired at all, it can be removed from the tool. Fig. D 10 17 To remove belt hook 1. Remove battery pack from tool. 2. To switch the tool from right- to left-hand usage simply remove the screw 17 from the opposite side of the tool and reassemble on the other side. 3. Replace battery pack. Tool Specifications Firing Mode Selectable: Sequential or Bump Voltage Height Width Length Weight (without battery) Magazine Angle Loading Capacity 20 13.3" (33.7 cm) 3.7" (9.3 cm) 12.9" (32.7 cm) 5.8 lbs. (2.6 kg) 34º 110 nails Nail Lengths Shank Diameters Nail Stick Angles Nail Specifications 1 1/4" - 2 1/2" (32 mm 64 mm) 15 gauge 34º OPERATION WARNING: To reduce the risk of serious personal injury, turn unit off and remove the battery pack before making any adjustments or removing/ installing attachments or accessories. An accidental start-up can cause injury. 9