Dewalt DCS373P2 Instruction Manual - Page 15

To Install The Blade

Get Dewalt DCS373P2 PDF manuals and user guides View all Dewalt DCS373P2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

TO INSTALL THE BLADE FIG. 5 1. Place inner clamp FIG. 4 washer (N) on saw spindle with the large flat surface facing out toward the blade O (Fig. 4, 5). F 2. Retract the lower blade guard (G) and place blade on saw spindle N against the inner clamp washer (N), making sure that the blade will rotate in the proper direction (the direction of the rotation arrow on the saw blade and the teeth must point in the same direction as the direction of rotation arrow on the saw). Do not assume that the printing on N the blade will always be facing you when properly installed. When retracting the lower blade guard to install the blade, check the condition and operation of the lower blade guard to assure that it is working properly. Make sure it moves freely and does not touch the blade or any other part, in all angles and depths of cut. 3. Place outer clamp washer (O) on saw spindle with the large flat SPINDLE surface against the blade with beveled side facing out. N O BLADE 13 F O F English

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
13
English
TO INSTALL THE BLADE
1. Place
inner
clamp
N
FIG. 4
O
F
washer (N) on saw
spindle with the large
flat surface facing out
toward
the
blade
(Fig. 4, 5).
2. Retract the lower blade
guard (G) and place
blade on saw spindle
against the inner clamp
washer (N), making sure that the blade will rotate in the proper
direction (the direction of the rotation arrow on the saw blade
and the teeth must point in the same direction as the direction of
rotation arrow on the saw). Do not assume that the printing on
the blade will always be facing you when properly installed. When
retracting the lower blade guard to install the blade, check the
condition and operation of the lower blade guard to assure that it
is working properly. Make sure it moves freely and does not touch
the blade or any other part, in all angles and depths of cut.
3. Place outer clamp washer (O) on saw spindle with the large flat
surface against the blade with beveled side facing out.
F
O
BLADE
N
FIG. 5
F
O
N
SPINDLE