Dewalt DW124 Instruction Manual - Page 3

DW124/384086-01 11/15/02 12:35 PM Page 4 English IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY DEWALT TOOL, CALL US TOLL FREE AT: 1-800-4-DEWALT (1-800-433-9258) BAIL HANDLE WARNING AVERTISSEMENT: • FOR SAFE OPERATION, READ INSTRUCTION MANUAL. • ALWAYS WEAR EYE PROTECTION. • DO NOT EXPOSE TO RAIN OR USE IN DAMP LOCATIONS. NE PAS EXPOSER A LA PLUIE ET NE PAS UTILISER DANS LES EMPLACEMENTS HUMIDES. 1/2" CHUCK SIDE HANDLE TRIGGER SWITCH REVERSING SWITCH Important Safety Instructions WARNING: When using electric tools, basic safety precautions should always be followed to reduce risk of fire, electric shock, and personal injury, including the following: READ ALL INSTRUCTIONS Grounding Instructions This tool should be grounded while in use to protect the operator from electric shock. The tool is equipped with a 3-conductor cord and 3prong grounding type plug to fit the proper grounding type receptacle. The green (or green and yellow) conductor in the cord is the grounding wire. Never connect the green (or green and yellow) wire to a live terminal. If your unit is intended for use on less than 150 V, it has a plug that looks like that shown in sketch A. If it is for use on 150 to 250 V, it has a plug that looks like that shown in sketch D. An adapter, sketches B and C, is available for connecting sketch A type plugs to 2-prong receptacles. The green-colored rigid ear, lug, or the like, extending from the adapter must be connected to a permanent ground, such as a properly grounded outlet box. No adapter is available for a plug as shown in sketch D. ADAPTER SHOWN IN FIGURES B and C IS NOT FOR USE IN CANADA. A GROUNDED B OUTLET BOX C D GROUNDING MEANS GROUNDING PIN ADAPTER GROUNDING PIN