Dewalt DW325C Instruction Manual - Page 8
OPERATION, Preparing the Tool Fig. 2, 3
View all Dewalt DW325C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
English FIG. 1 B a. Use DeWALT pneumatic tool oil or a non-detergent S.A.E. 20 weight oil. DO NOT use detergent oil or additives as they will damage o-rings and rubber parts. b. Use a filter-regulator-lubricator in the air line between the A compressor and the tool when possible. c. If a lubricator is not available, add 5 to 10 drops of oil in the air fitting a least twice a day or every 4 hours of use. C FIG. 2 FIG. 3 D E F OPERATION Preparing the Tool (Fig. 2, 3) WARNING: Read the section titled Important Safety Instructions at the beginning of this manual. Always wear eye and ear protection when operating this tool. Keep the nailer pointed away from yourself and others. For safe operation, complete the following procedures and checks before each use of the nailer. 1. Before you use the nailer, be sure that the compressor tanks have been properly drained. 2. Lubricate the tool following these directions: 3. Wear proper eye, hearing and respiratory protection. 4. Remove all fasteners from the magazine. 5. Check for smooth and proper operation of contact trip and pusher assemblies. Do not use tool if either assembly is not functioning properly. NEVER use a tool that has the contact trip restrained in the up position. 6. Check air supply. Ensure that air pressure does not exceed recommended operating limits, refer to Tool Specifications. 7. Connect air hose. 8. Check for audible leaks around valves and gaskets. Never use a tool that leaks or has damaged parts. 6